Government Contract | Oklahoma
Purchase of four (4) SALT BRINE PRODUCTION SYSTEMS WITH CLEANOUT

Bid Information


Bid Alert No: 00000603475

Bid Title: Purchase of four (4) SALT BRINE PRODUCTION SYSTEMS WITH CLEANOUT

Agency Bid No. Title: 3450004623

Received Date: 06/20/2016

Close Date: 07/06/2016

Purchase Type: Spot

Delivery Point:

Delivery Date: Not Stated

Specifications

Specifications include, but are not limited to:Introduction: C.1.1. The following specifications and dimensions will apply to purchases of SALT BRINE PRODUCTION SYSTEM WITH CLEANOUT for the Oklahoma Department of Transportation. C.1.2. The unit shall be a current model, new and unused, under standard production by the manufacturer, and of which parts are stocked at one or more locations in Oklahoma or Greater Oklahoma City. The requirement for parts to be stocked at locations in Oklahoma or Oklahoma City may be waived if the bidder provides an alternative parts availability plan acceptable to the Agency. All parts utilized on the unit will be new and unused. C.2. General Specifications: C.2.1. All components will be constructed of non-corrosive material.C.2.2. All necessary fittings, hardware, hoses and connections will be included to hook up to a water supply, produce the brine and pump into a storage tank up to 50 feet away.Overall system dimensions shall be approx. 10'9" wide x 6'1" deep x 9'0" high.C.2.3. All tanks or bins will be heavy duty 304 stainless steel guaranteed by the manufacturer for the intended use.C.2.4. The unit will be constructed to facilitate complete cleanout and to allow ready access to all required drains and maintenance points.C.2.5. Unit will be capable of completely flushing out all fresh water with salt brine in the recirculation mode. There shall be no components of the system susceptible to freezing above the freezing temperature of salt brine. C.3. Minimum Requirements C.3.1. All valves and plumbing necessary to provide the above functions will be provided. If flexible plumbing is utilized, cam lock fittings with turn ball valves shall be provided. C.3.2. The pump and motor will be designed to be used in a high corrosive environment and shall be mounted to provide for easy access for maintenance. C.3.3. The pump and motor will be 220 Volt single phase and capable of pumping 100 gpm, minimum. C.3.4. The pump housing and impeller will be stainless steel and close coupled. Lovejoy couplings are not acceptable. C.3.5. All rigid plumbing will be PVC schedule 80, minimum

Bid Related Documents

Download Document

Amendments

Download Amendment

Product Code: 54565

Agency Information


Issuing Agency: State of Oklahoma - Office of Management and Enterprise Services

State: Oklahoma

Agency Type: State and Local

Contact: Jeffery Finlay, Central Purchasing Central Purchasing, 5005 N. Lincoln Blvd., Suite 300, Oklahoma City, Oklahoma, 73105

Phone: 405-522-2666

Fax: 405-521-4475

Email: jeffery.finlay@omes.ok.gov

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW