Government Contract | Arkansas
Pull Type Rotary Mower, 15' Mowing Width, w/Standard Drive Line

Bid Information

Bid Alert No: 00000421107

Bid Title: Pull Type Rotary Mower, 15' Mowing Width, w/Standard Drive Line

Agency Bid No. Title: H-16-247R

Received Date: 11/19/2015

Close Date: 12/01/2015

Purchase Type: Not Stated

Delivery Point:

Delivery Date: Not Stated


Specifications include, but are not limited to:Hydraulic System: Hydraulic cylinder(s) for raising and lowering center section to control cutting and traveling heights, and hydraulic cylinders to raise and lower each side section from or below horizontal to vertical position. All cylinders to be operated from tractor hydraulic pump without operator leaving seat on tractor. All necessary hydraulic hose and both sides of quick snap, self-sealing couplers for hookup to 3 spool control valve on tractor shall be furnished. 12.Winch: A hand operated winch complete with cable shall be furnished for manually lifting or lowering mower side sections. 13.Wheels & Tires: Six (6) 22 ply minimum recap airplane tires no less than 27.75 x 8.75 - 14 mounted on special two piece bolt together wheels. Tire size shall be clearly visible on sidewall of tire. Hubs to have automotive type bearings. Wheel suspension to be designed to allow mower to float following contour of ground and shall be adjustable to regulate cutting height. 14.Foam Filled Tires: Tires shall be filled with a synthetic rubber compound in lieu of air to provide a puncture-proof capability. 15.Tongue: Shall be equipped with a swivel clevis to relieve stress on tractor drawbar (as a reference for tractor drawbar use New Holland Model TL 90, John Deere Model 5525, Massey Ferguson Model 596). Tongue shall be long enough to permit any turns with usual tractor wheel spacing. A parking jack shall be provided. 16.Technical Assistance: If necessary, the successful bidder will supply technical assistance to assure that units are properly adjusted and that correct drive lines, etc. have been furnished. 17.Weight: Shall have a minimum operating weight of 4,500 pounds. 18.Color: Manufacturers standard color is acceptable.

Bid Related Documents

Download Document

Product Code: 02066

Agency Information

Issuing Agency: State of Arkansas Department of Highway and Transportation

State: Arkansas

Agency Type: State and Local

Contact: AHTD Equipment and Procurement Division, 11302 W. Baseline Road, Little Rock, Arkansas, 72203



FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing