Government Contract | New York
Procure oil/water/solids separator system

Bid Information

Bid Alert No: 00000559767

Bid Title: Procure oil/water/solids separator system

Agency Bid No. Title: 0000132308

Received Date: 05/02/2016

Close Date: 06/03/2016

Purchase Type: Not Stated

Delivery Point:

Delivery Date: Not Stated


Specifications include, but are not limited to:The Oil/Water/Solids Separator System is used to treat the spent wash solution from the spray washoperation at the 207th Street Facility. The Oil/Water/Solids Separator System provided by the Contractorshall include a stainless steel construction tank with coalescer filter, oil skimmer, flow equalizationbaffles, controls, fittings and specified accessories.Additionally, an EQ Settling Tank is essential to remove any large particulates from the waste-watersolution before it gravity flows to the Oil/Water/Solids Separator. These EQ settling and Oil/Water/Solidstanks shall have a maximum flow rated capability of ten (10) gallons per minute with an approximateoperating volume of 150 gallons. The Separator and the Settling Tank shall come with an electricalimmersible standard heater fittings, (which shall be approximately six (6) inches above the bottom ofeach tank) to allow the installation of freeze prevention in the future. After the waste-water solution istreated in the Settling Tank and Oil/Water/Solids Separator, it must meet the attached Sewer DischargeCriteria as required by the Federal Environmental Protection Agency, State and City requirements (SeeAttachment A).NYC Transit requires the wash solution to flow from the EQ Settling Tank to the Oil/Water/SolidsSeparator by gravity, and from the Separator to the sewers by gravitation as well. Therefore, thestands for the EQ Settling Tank and Separator shall be of appropriate heights in order to create theacceptable gravitation flow of the spent wash solution. The flow of the solution shall not be createdthrough the use of any mechanical device, such as a pump, to provide the flow of solution.The Contractor shall provide and install the following: #304 Stainless Steel Oil/Water/Solids Separator tank with approximate dimension of 72 inches(Length) x 36 inches (Width) x 30 inches (Height) construction with removable top cover; EQ Settling Tank shall be four (4) feet in diameter, with nominal height of 36 inches, with conebottomon stand with cover; Automatic smooth tube oil skimmer with total capacity of between eight (8) and fifteen (15)gallons;

Product Code: 89053

Agency Information

Issuing Agency: New York City Transit Authority (MTA New York City Transit)

State: New York

Agency Type: State and Local

Contact: Joseph Wexler, Materials Management CADMAN SHOP, 40 SANDS ST, BROOKLYN, New York, 11201

Phone: 646-252-6217




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing