Government Contract | Arkansas
Pneumatic Tired Industrial Forklift, 6,000 Pounds Capacity

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information

Bid Alert No: 00000441436

Bid Title: Pneumatic Tired Industrial Forklift, 6,000 Pounds Capacity

Agency Bid No. Title: H-16-252P

Received Date: 12/16/2015

Close Date: 01/05/2016

Purchase Type: Not Stated

Delivery Point: Little Rock, Arkansas

Delivery Date: Not Stated

Special Notices: Performance Bond Required: , Bid Bond Required: , Bidder Preregistration


Specifications include, but are not limited to:General: This specification is intended to cover an LPG engine powered industrial lift truck with a minimumbasic rated capacity of 6,000 pounds at 24 load center equipped with pneumatic tires, powershifttransmission and 42 forks.2. Engine: Liquid cooled LPG fueled engine developing a minimum of 55 gross horsepower at rated RPM.Shall have starter, battery, alternator and ammeter or charge indicator. Shall be equipped with approved typeair cleaner, oil filter, muffler and 33 pound LPG fuel tank. Cooling system shall have anti-freezeprotection to -20o F, or lower.3. Transmission: Shall be power shift, driven through a torque converter, with a minimum of one (1) forwardspeed and one (1) reverse speed. Maximum speed shall be no less than 10 mph.4. Drive Axle: Axle and differential assembly as regularly furnished by manufacturer for use with 4,000 poundbasic capacity forklift.5. Steering Axle: Shall be as recommended by manufacturer as shown on printed literature and specificationsheets for use with lift truck capacity specified above. Steering shall be hydrostatic or hydraulic powerassist.6. Mast: Shall have a Triplex mast with three stages consisting of roller type telescopic I beam inner sectionsmounted within steel outer channel. Shall be no more than 87 high in the lowered position and have amaximum fork height of no less than 180. Shall have a minimum fork free lift of 35 with backrest. Mastshall have a maximum tilting range forward of no less than 6o and backward of no less than 5o. Forks shallhave a maximum spread capability of no less than 38. Back rest to be no less than 42 high. Forks shall beno less than 42 long, constructed from heat treated steel with bottom tapered to allow chisel tips to slideunder palletless loads.7. Side Shift: Shall be equipped with a hydraulic side shift attachment which will shift carriage assembly aminimum of 4 either side of center. Hydraulic hoses to side shift shall be internal type (routed inside themast assembly).8. Hydraulic System: Shall consist of reservoir, pump, control valves, hoist, tilt and side shift cylinders,necessary relief valves and necessary filters with replaceable elements.

Bid Related Documents

Download Document

Product Code: 56075

Agency Information

Issuing Agency: State of Arkansas Department of Highway and Transportation

State: Arkansas

Agency Type: State and Local

Contact: Joanna McFadden AHTD Equipment and Procurement Division, 11302 W. Baseline Road, Little Rock, Arkansas, 72203

Phone: 501-569-2298




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing