Government Contract | Kentucky
ONE (1) NEW V-BOX SAND & SALT SPREADER

Bid Information


Bid Alert No: 00000527457

Bid Title: ONE (1) NEW V-BOX SAND & SALT SPREADER

Agency Bid No. Title: 02-2016

Received Date: 03/30/2016

Close Date: 04/05/2016

Purchase Type: Not Stated

Delivery Point: Daviess County, Kentucky

Delivery Date: Not Stated

Specifications

Specifications include, but are not limited to:MINIMUM BODY REQUIREMENTS: Capacity to be (14) yd3 struck Inside length to be (14) feet Inside height to be (63) inches Inside top width to be 82 Side slope to be 450 minimum Hopper seems to be continuous welded on inside Sides, ends, & side supports to be 10 gauge 304 stainless steel. Top edge of hopper is formed "J" channel 1 3/4" x 1 1/8" Body floor is 10 gauge 304 stainless steel bolt-in replaceable Long sills to be 10 gauge 304SS Chain shields are 10 gauge 304 SS Cross sills to be 3 1/4 X 1 1/2 formed 7 gauge 304SS ; welded to side supports Feedgate is 10 gauge 304SS 12"x18 5/8"; screw-jack adjustable from driver side Lift hooks on each corner are 5/8 304SS round bar All hardware is stainless steel. All welds go through passivation process to ensure reformation of chrome oxide layer ofstainless steel for optimum corrosion protectionMINIMUM TOP SCREEN REQUIPMENTS: 6 section hinged top grate screens 3/8 Diameter bar on 3 centers framed with x 2 x 2 structural angle Hinged on 2 - 6 horizontal crossbeam side to side Powdercoated blackMINIMUM CONVEYOR REQUIREMENTS: Rear discharge pintle chain conveyor to be 24 wide overall Heat treated alloy steel chain; 21,000 lbs./strand Chain pins to be 7/16" diameter with 2-1/4" pitch (667X) Cross bars to be 3/8" x 1-1/2" on 4-1/2" centers Cross bars must lay flat on conveyor floor 4 screw idler adjustment Chain tension adjusting screw to be 5/8" diameter stainless steel Drive shaft to be 2" diameter zinc plated alloy steel mounted in sealed ball bearings Idler shaft to be 1 1/2 diameter zinc plated alloy steel mounted in sealed ball bearings Conveyor sprockets to be self-cleaning 8 tooth cast iron, keyed to drive and idler shafts

Bid Related Documents

Download Document

Product Code: 76566

Agency Information


Issuing Agency: County of Daviess

State: Kentucky

Agency Type: State and Local

Contact: Owensboro-Daviess County Regional Airport, 2200 Airport Road, Owensboro, Kentucky, 42301

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW