Government Contract | Kentucky
ONE (1) NEW 16FT REVERSIBLE PLOW

Bid Information


Bid Alert No: 00000527458

Bid Title: ONE (1) NEW 16FT REVERSIBLE PLOW

Agency Bid No. Title: 03-2016

Received Date: 03/30/2016

Close Date: 04/05/2016

Purchase Type: Not Stated

Delivery Point: Daviess County, Kentucky

Delivery Date: Not Stated

Special Notices: Warranty Required

Specifications

Specifications include, but are not limited to: Moldboard shall not be less than 50 high in the center portion, and not less than 60 high at thedischarge ends. Overall width shall be 16ft, and so formed as to lend itself to high speed plowingoperations. In order to offer a low coefficient of friction and resistance to both corrosion and impact, amoldboard sheet (overlay) of 3/8 thick polymer sheet shall comprise the moldboard face. Thepoly sheet for the center section shall be 60 high in its flat form, and a minimum of 10ft long.The poly sheets for each discharge end shall be 84 x 72 in its flat form. The moldboard shall overhang the cutting edge a minimum of 12 along the entire width of theplow. A heavy duty, three-section, rubber snow shield shall be bolted to the top angle, and shallrun the entire length of the plow. The top angle of the moldboard shall be constructed of 3 x 3 x 3/8 structural steel. Thebottom angle of the moldboard shall be constructed of 4 x 7 x structural steel angle. Thetop and bottom angles shall be connected by a minimum of sixteen (16), 3/8 thick ribs. Ribsshall be 7 wide at the bottom angle, and taper to 3 at the top, and shall provide a steelbacking with which to support the polymer sheet. Ribs shall be braced at the bottom with 3/8thick, triangular shaped gussets. The moldboard attack angle shall be adjustable to three (3) different layback settings. Two (2)layback/support adjustment tubes shall be manufactured from 3 x 5 x 3/8 structural steel tube.Each tube shall be a minimum of 29 in length, and shall be attached at upper and lower endswith 1.125 diameter, solid steel pins. Moldboard shall accept polyurethane, carbide, rubber, or steel cutting edges.

Bid Related Documents

Download Document

Product Code: 76561

Agency Information


Issuing Agency: County of Daviess

State: Kentucky

Agency Type: State and Local

Contact: C. Jordan Johnson Owensboro-Daviess County Regional Airport, 2200 Airport Road, Owensboro, Kentucky, 42301

Phone: 270-685-8424

Email: jjohnson@daviessky.org

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW