Government Contract | Arkansas
LOW FLOOR PURPOSE BUILT MOBILITY VEHICLE

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information


Bid Alert No: 00000409157

Bid Title: LOW FLOOR PURPOSE BUILT MOBILITY VEHICLE

Agency Bid No. Title: PT 16-04

Received Date: 11/03/2015

Close Date: 11/18/2015

Purchase Type: Not Stated

Delivery Point: Arkansas

Delivery Date: Not Stated

Special Notices: Bid Bond Required: $1000, Warranty Required

Specifications

Specifications include, but are not limited to:1. Air conditioning: Shall have a front and rear system with separate controls for each.2. Alternator: Shall have a minimum OEM 155 amp.3. Axle, Rear: Shall have a rear axle ratio of 3.45.4. Battery: Maintenance free battery with a minimum rating of 750 cold cranking amps at 0 F.5. Body: Shall be reinforced at all joints and corners to support GVWR. Dimensions shall be exteriorheight 75 maximum, exterior width 80 maximum, and ground clearance 6 minimum. Shall withstandroad shock under normal conditions.6. Brakes: Power front and rear disc with four-wheel anti-lock, stability control, traction control anddynamic rear proportioning system.7. Cooling System: Heavy duty with heavy duty temperature controlled fan, and factory installed coolantrecovery system.8. Cruise Control: Shall have a factory installed system.9. Defroster: Rear window.10. Engine: Shall be a V-6 with a minimum 3.7-liter displacement.11. Floor Covering: Shall be a transit grade rubber or transit grade vinyl in standard black finish with aminimum of 2mm thickness.12. Flooring: Shall be a metal floor with sufficient insulation.13. Frame: Shall have a fully boxed frame, tubed supportive cross members.14. Fuel Tank: Shall have a minimum 24 gallon.15. Heater: Integral fresh air heater and defroster with front and rear controls.16. Interior: Shall have flame retardant material with a minimum 64.5 width, a minimum 81.5 floor lengthand a minimum 57.5 height. Fully insulated to provide maximum passenger comfort.17. Interior Finish: Shall be a flame retardant extruded plastic material or approved equal, of sufficientthickness and durability to maintain its appearance under heavy usage, and be adequately supported toprevent buckling. Material shall be color keyed to the seat color and be subject to approval by theDepartment.

Bid Related Documents

Download Document

Product Codes: 92829, 05512, 55736, 55630

Agency Information


Issuing Agency: State of Arkansas Department of Highway and Transportation

State: Arkansas

Agency Type: State and Local

Contact: Don McMillen AHTD Equipment and Procurement Division, 11302 W. Baseline Road, Little Rock, Arkansas, 72203

Phone: 501-569-2471

Fax: 501-569-2476

Email: donny.mcmillen@arkansashighways.com

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW