Government Contract | Alabama
Submersible Wastewater Pumps & Dry Pit Submersible Wastewater Pumps

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information

Bid Alert No: 00001974497

Bid Title: Submersible Wastewater Pumps & Dry Pit Submersible Wastewater Pumps

Agency Bid No. Title: 30-2020-8000

Received Date: 12/10/2019

Close Date: 12/31/2019

Purchase Type: Not Stated

Delivery Point: Water Pollution Control, 1800 Vermont Road, Huntsville, Alabama, 35802

Delivery Date: Not Stated

Special Notices: Questions Due By 12/20/2019 05:00 PM, Bid Bond Required: 5%, Performance Bond Required: 100%, Payment Bond Required: 100%


Specifications include, but are not limited to: purchase of Nineteen (19) Submersible Non-ClogWastewater Pumps & Three (3) Dry Pit Submersible Non-Clog Wastewater Pumps ; 1) Supply three (3) non-clog submersible pumps, bases, brackets, rails, and associated equipment forthe Old 431 Lift Station per the following:Design conditions: 1,300 gpm @ 98ft. TDHSecondary design conditions: 650 gpm @ 130ft. TDHMinimum Motor HP: 58Maximum Motor RPM: 1800Voltage: 460VMinimum Hydraulic Efficiency: 63%Minimum Total Efficiency: 60% ; The pumps design shall allow for removal and reinstallation of the pump without the need forpersonnel to enter the confined space of the wet well and without the removal of bolts, nuts or otherfasteners.11 Each of the 19 submersible pumps to have upper and lower dual guide rail brackets to hold at aminimum 2 stainless steel pipe. No cable rail systems will be accepted. ; Each of the 19 submersible pumps (with the exception of Bob Wallace PS and Indian Creek PSpumps) to have base 90s fitted for specific pump.16Major components (pump casting, impeller, intermediate housing, motor housing) shall be of aminimum ASTM A48 Class 40B cast iron with smooth surfaces devoid of blowholes and otherirregularities ; Mating services between components where watertight integrity is critical shall be machined and fittedwith Nitrile Rubber or Viton O-rings. Because these are critical passages and flame paths, nosecondary sealing compounds, greases, or other devices shall be used.

Product Codes: 72025, 72064

Agency Information

Issuing Agency: City of Huntsville

State: Alabama

Agency Type: State and Local

Contact: LaRissa Mack Procurement Services, 308 Fountain Circle, P.O. Box 308, Huntsville, Alabama, 35801

Phone: 256-427-5058

Fax: 256-427-5059




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing