Government Contract | Idaho
SAWC Washer and Dryer FY22

Specifications include, but are not limited to:RIGID MOUNT WASHER, UNIMAC UWT065D4 or Equivalent Quantity 1 Must be 65 lb capacity Quote should be for simplest, most manual controls which are easiest for resident operators to use Width must not exceed 35 in Depth must not exceed 52 in Height must not exceed 65 in Must have rigid mount Electrical must be 208/240v, 60hz, 3 phase Must have a minimum 30 in cylinder diameter Must have a minimum door opening of 17 in Must have a minimum cylinder volume of 9.7 cu ft Must have a in (19mm) water inlet connection Must have a in (13mm) steam connection Must have a 3 in drain valve Must have a minimum 300 G Force extraction Must have a minimum 5 HP drive motor Must have a minimum warranty of 5 years on frame, cylinder, and shell A live use-of-equipment training session must be provided immediately following the installation for 1laundry officer and 1 maintenance technician. Contractor must provide training time of up to 60 minutes. Delivery with liftgate and installation must be included in the price quoted. Contractor must deliver thewasher within 90 days from date of award and complete the installation within 2 working days afterdelivery. Earlier delivery and installation is preferred. Delivery must occur on a date to be mutuallydetermined by IDOC Maintenance and the Contractor.GAS DRYER, UNIMAC UT075DN or Equivalent Quantity 1 Must be 75 lb capacity Quote should be for simplest, most manual controls which are easiest for resident operators to use Width must not exceed 39 in Depth must not exceed 53 in Height must not exceed 78 in Must have fire suppression Must run on natural gas Must be 110V, 50-60 Hz, 1 phase Must have a minimum 37 in cylinder diameter Must have a minimum 22 cu ft basket volume Must have air outlet of 8 in Must be minimum of 165,000 BTU/hr heat input Must have minimum of 800 cfm airflow Must have minimum warranty of 3 years parts, 90 days labor A live use-of-equipment training session must be provided immediately following the installation for 1laundry officer and 1 maintenance technician. Contractor must provide training time of up to 60 minutes. Delivery with liftgate and installation must be included in the price quoted. Contractor must deliver thedryer within 90 days from date of award and complete the installation within 2 working daysafter delivery. Earlier delivery and installation is preferred. Delivery must occur on a date to be mutuallydetermined by IDOC Maintenance and the Contractor.