Government Contract | Oregon
Salmon River Intake Screen Purchase

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information


Bid Alert No: 00002697543

Bid Title: Salmon River Intake Screen Purchase

Agency Bid No. Title: S-63500-00000315

Received Date: 07/27/2021

Close Date: 08/13/2021

Purchase Type: Term: 09/01/2021

Delivery Point: Salmon River Hatchery, 575 N. North Bank Road, Otis, Oregon, 97368

Delivery Date: Not Stated

Special Notices: Questions Due By 08/03/2021 02:00 PM

Specifications

Specifications include, but are not limited to: Purchasing four (4)intake screens. Salmon River Hatchery is located at 575 N. North Bank Road, Otis, Oregon 97368 and needs toreplace all of the intake screens at its water diversion structure. Frame: Stainless Steel, Grade 304 framing components. Constructed to fit within the clear widths shown in the attached plans. Constructed to provide the height indicated in the attached plans. Member size and material grade to be determined by manufacturer to provide neededstructural strength for the intake screen to resist hydraulic forces at the project. Adequate lifting points to be provided to allow for easy installation and removal of the screen.Belt Material: Stainless Steel belting. Clear gap distance of belting to be no greater than 3/32. Stainless steel angles on the face to create horizontal cleaning flutes to lift debris. Space flutesno greater than 4-0 apart. Seals on the side and bottom of the belt materialto limit gaps between the sides of the frameand the belting material to less than or equal to 3/32. Side and bottom seals to seal against the floor and sidewalls of the existing structure. The sealsshall be made of a flexible and durable material to allow for sealing against an uneven surface. Any gaps in drive chains shall have an appropriate cover while underwater on the river side ofthe screen to limit any gaps to 3/32 or smaller.Bearings, Guides, Fasteners, and Drive Motor: Bearings: to be rated for underwater use, sealed, and nonlubricated. Guides: to be UHMW and sufficient thickness to provide a durable wearing surface. Fasteners: All fasteners to be stainless steel. Grade to be determined by manufacturer for theloads on the fastener. Drive Motor: to be sized by manufacturer to allow for moving the belt material under debrisloading. Motor to be located at a height above the top of the structure wall as shown in theattached plans.

Product Code: 93611

Agency Information


Issuing Agency: State of Oregon - Department of Fish and Wildlife

State: Oregon

Agency Type: State and Local

Contact: Julie Cone Procurement Section, 4034 Fairview Industrial Drive SE, Salem, Oregon, 97302

Phone: 503-947-6125

Fax: 503-947-6156

Email: julie.l.cone@state.or.us

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW