Government Contract | Iowa
Remove and Replace OH doors and Operators at Alton DOT Garage

Bid Information


Bid Alert No: 00002782043

Bid Title: Remove and Replace OH doors and Operators at Alton DOT Garage

Agency Bid No. Title: RFB FY2022 #016

Received Date: 10/14/2021

Close Date: 11/04/2021

Purchase Type: Term: 05/27/2022

Delivery Point: Not Stated, Iowa

Delivery Date: Not Stated

Special Notices: Bidder Preregistration

Specifications

Specifications include, but are not limited to: A. Steel Doors: Flush steel exterior, insulated; high lift operating style with track and hardware;complying with DASMA 102, Commercial application.1. Performance: Withstand positive and negative wind loads equal to 1.5 times designwind loads specified by local code without damage or permanent set, when tested inaccordance with ASTM E330/E330M, using 10 second duration of maximum load.2. Door Nominal Thickness: 2 inches ( 51 mm ) thick.3. Exterior Finish: Factory finished with acrylic baked enamel; color as selected byArchitect from manufacturers standard line.4. Interior Finish: Factory finished with acrylic baked enamel; color as selected frommanufacturers standard line.5. Exterior Steel: 20 gauge, galvanized.6. End Stiles: 16 gauage, galvanized.7. Spring Counterbalance: Sized to weight of the door, with a helically wound, oiltempered torsion spring mounted on a Type 2 - Typical Wash Bay: solid shafts Type2 -Brine Maker: stainless steel shaft; cable drum of diecast aluminum with high strengthgalvanized aircraft cable. Sized with a minimum 7 to 1 safety factor.

Product Codes: 90937, 91014, 91015

Agency Information


Issuing Agency: State of Iowa - Department of Transportation

State: Iowa

Agency Type: State and Local

Contact: Jody McNaughton, Purchasing Section

Phone: 515-239-1298

Fax: 515-239-1538

Email: jody.mcnaughton@iowadot.us

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW