Government Contract | Illinois
Rebid D3 Liquid Salt Applicator

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information


Bid Alert No: 00002346289

Bid Title: Rebid D3 Liquid Salt Applicator

Agency Bid No. Title: 21-494DOT-FINAD-B-17561

Received Date: 09/23/2020

Close Date: 09/29/2020

Purchase Type: Not Stated

Delivery Point: ILLINOIS

Delivery Date: Not Stated

Special Notices: Bidder Preregistration

Specifications

Specifications include, but are not limited to: Tank:The tank system shall consist of a single tank, mountable in a single axle truck dump body, having an inside width of 84, and a length of approximately 8-0, with molded in sump, spray bar and all mounting hardware for applying a salt water solution to pavements. The pump must not pressurize the tank.The following accessories and options shall be included with the liquid salt applicator:The tank shall be a natural translucent color so the liquid level can be seen inside the tank, molded of high density polyethylene resin with UV protection. The tank shall be rated with a minimum specific gravity of 1.7 and warranted for 3-years.The tank shall have molded-in legs and have an approximate capacity of 1,065 gal. The tank shall have a molded center baffle and include wiffle-ball style baffles to inhibit excessive sloshing and motion while stopping and turning.Complies: Yes NoTotal tank capacity:GallonsNumber & diameter of balls:InchesThe tank shall have molded-in gallonage markers.Complies: Yes NoThe tank shall have a minimum 16 diameter man way opening with screw-type vented lid.Complies: Yes NoThe tank shall be securely mounted to the skid frame with a minimum of three 1-1/2 stainless steel hoops secured by J-bolts equipped with Ny-Lock nuts or equal fastening to secure the bottom of the stainless steel hoops to the skid frame.Complies: Yes NoSkid Frame:The skid frame assembly shall be constructed using U.S. Domestic 201 austenitic stainless steel or equivalent corrosion resistant U.S. Domestic non-magnetic stainless steel. A copy of Certification of Compliance shall be included with units delivered to each location. Welding shall conform to Certified AWS standards and practices. All seams and joints will be 100% welded. All sheared or cut edges shall be ground, radiused, or eased to prevent injury.Complies: Yes No

Product Codes: 07200, 05586, 06592

Agency Information


Issuing Agency: State of Illinois - Department of Transportation (IDOT)

State: Illinois

Agency Type: State and Local

Contact: Brett Barnes

Phone: 217-785-3851

Email: brett.a.barnes@illinois.gov

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW