Government Contract | Missouri
Heman Park Parking Lot and Trail

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information


Bid Alert No: 00002552256

Bid Title: Heman Park Parking Lot and Trail

Agency Bid No. Title: PRF2021-001

Received Date: 03/25/2021

Close Date: 04/01/2021

Purchase Type: 30 calendar days

Delivery Point: University City, Missouri

Delivery Date: Not Stated

Special Notices: Bidder Preregistration, Bid Bond Required: 5%

Specifications

Specifications include, but are not limited to: Heman Park Parking Lot and TrailCrack Sealing - Crack Sealing - Straight Line and Singular Cracks - Blow out all joints with a high velocity blower and remove debris with steel bristle broom or other crack cleaning equipment. Upon completion of crack preparation, fill cracks with Right Pointe Parking Lot Sealant (PLS) rubberized hot pour elastic crack sealer. Immediately follow with a finish tool to level the material in a narrow band across the cracks. PLS shall be heated in a direct fire kettle to a pouring temperature of 380 to 400 degrees Fahrenheit per manufacturers specified recommendation. Note: Finished sealant will vary from being level to being recessed approximately/ inch to reduce the possibility of shoving during snowplow operations. Seal Coating - One (1) coat squeegee and one (1) coat spray - Clean pavement with high velocity air blowers used in conjunction with stiff brooms. Seal pavement with two (2) coats of high solids MAC 52 or equivalent pavement sealer. Sealer to be in slurry form with the addition of four (4) pounds of silica sand per one (1) gallon. The first coat to be applied by squeegee; the second coat to be applied by spray. Striping - General parking stalls shall be a minimum of nine (9') feet wide by eighteen (18') feet in length, handicapped parking stall shall comply with ADA standards, and all driving lanes/isles shall be a minimum of twenty-one (21') feet wide. All parking stall striping lines must be four (4") inches. The paint shall be a fast-drying, water-based, acrylic resin-type paint suitable for traffic-bearing surface and shall meet all appropriate sections of the Missouri Standard Specifications for Highway Construction and shall be mixed in accordance with manufacturer's instructions before application.

Bid Related Documents

Download Document

Product Codes: 91375, 91276, 91396, 91395, 91394, 91252

Agency Information


Issuing Agency: City of University City

State: Missouri

Agency Type: State and Local

Contact: Darren Dunkle Administrative Services Department, 6801 Delmar Blvd. 1st Floor, University City, Missouri, 63130

Email: ddunkle@ucitymo.org

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW