Government Contract | New Jersey
Furnish and Deliver High Density Polyethylene (HDPE) Pipe and Assorted Fittings

Bid Information

Bid Alert No: 00002064076

Bid Title: Furnish and Deliver High Density Polyethylene (HDPE) Pipe and Assorted Fittings

Agency Bid No. Title: MUA-EQUIP-06-20

Received Date: 02/19/2020

Close Date: 03/05/2020

Purchase Type: Term:

Delivery Point: Cape May County, New Jersey

Delivery Date: Not Stated

Special Notices: Bidder Preregistration


Specifications include, but are not limited to: A. High Density Polyethylene Pipe (HOPE) Solid and Slotted and PerforatedAll pipes shall be HDPE rated SDR-17 as specified at 100 PSI minimum. Thepipe shall be manufactured from virgin polyethylene resin, PE34081PE3608 andshall conform to ASTM D3350 as manufactured by ISCO Industries or approvedequivalent. All pipe shall conform to IPS sizes. Pipe is required in three (3)different styles as follows:1. Solid Pipe Solid pipe shall be furnished in a minimum of twenty-foot (20)lengths.2. Slotted Pipe Slotted pipe shall be furnished in lengths of twenty1oot(20). All slotted pipe shall have one eighth of an inch (1/8) width slotslocated with 2 spacing and 2.6 slot lengths at each ninety (90) degreemeasurement of the pipe circumference.3. Perforated Pipe Perforated pipe shall be furnished in lengths of twentyfoot (20). All perforated pipe shall have eight (8) rows of one quarter inch(1/4) diameter perforations equally spaced at 45 degrees around thecircumference of the pipe. The lateral distance between perforations shallbe three-inches (3).B. HOPE Fittings1. All fittings including tees, elbows, flange adapters, valves, etc. shall beHDPE materials, with a pressure rating equal to or greater than pressureratings for the specified pipe. All fittings shall conform to IPS sizes. Allproposed fabricated fittings must be designed and manufactured to work inconjunction with the pipe materials specified above using standard HDPEbutt fusion welding equipment or Electro Fusion couplings. HDPE pipefittings shall be manufactured by ISCO Industries or approved equivalent.2. HDPE Electro Fusion Couplings Electro fusion couplings shall conformto IPS sizes. All couplings shall be rated to couple and burst test at aminimum to meet or exceed SDR-17 rated piping (100 PSI) with fusion ofthe pipe to the coupler. All fusion couplers shall be capable of beinginstalled by a Central Plastics Universal Electro Fusion Processor TM,currently owned by the CMCMUA.

Bid Related Documents

Download Document

Bid Related Attachments

Download Attachment

Product Codes: 65985, 65941, 65933, 67077, 65858, 65965, 65906, 65927

Agency Information

Issuing Agency: Cape May County Municipal Utilities Authority

State: New Jersey

Agency Type: State and Local

Contact: 1523 Route 9 North, Swainton, New Jersey, 08210



FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing