Bid Information
Bid Alert No: 00003422404
Bid Title: Front & rear load commercial containers
Agency Bid No. Title: 014-23
Received Date: 03/01/2023
Close Date: 03/09/2023
Purchase Type: Not Stated
Delivery Point: Shawnee County, Kansas
Delivery Date: Not Stated
Specifications
All correspondence must be made through the Vendor Portal.Specifications include, but are not limited to: Shawnee County is soliciting bids commercial waste containers for use in its solid waste activities; (Front-load) Container: 1 yard thru 8 yard all side panels must be 12-gauge steel. (No seams). 1 yard thru 8 yard bottom must be 10-gauge steel. (No seams). 12-gauge formed top channel around container top. 3/16 flared fork pockets. 3/16 gusset welded on the rear top and bottom side of the pocket for added pocket strength. 3/16 Front bumper to prevent damage to the container. 10-gauge full length bottom channel support. 1 yard thru 8 yard containers must have (4) 7 gauge caster pads. 1/2 lid rod supported by 3/16 steel brackets welded to the steel frame. 1 Removable drain plug. Container must be primed inside and out. (Rear-load) Container: Containers shall have front panel sloped to allow for ease of dumping 1 yard thru 8 yard all side panels/bottom must be 12-gauge steel. (No seams). All corners must have continuous welded seams for strength. 12-gauge formed top channel around container top. 1 solid steel winch hook welded in the center on the outside of the top channel for dumping. Trunnion Bar: 1, 2 yard container 1 3/8 solid steel bar with keepers welded on both ends. 3, 4 yard container 1 1/2 solid steel bar with keepers welded on both ends. 6, 8 yard container1 3/4 solid steel bar with keepers welded on both ends. 11/2 Removable drain plug.
Product Code: 06575
Agency Information
Issuing Agency: County of Shawnee
State: Kansas
Agency Type: State and Local