Government Contract | Ohio
Fire Hose and Fittings

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information


Bid Alert No: 00002756863

Bid Title: Fire Hose and Fittings

Agency Bid No. Title: 221A901222

Received Date: 09/20/2021

Close Date: 09/30/2021

Purchase Type: Term:

Delivery Point: Cincinnati, Ohio

Delivery Date: Not Stated

Specifications

Specifications include, but are not limited to: ITEM 1: SPECIFICATIONS 1 inch KEY FIRE HOSE, COMBAT READY DP17-1000 1. Hose shall be new and unused. 2. Color Yellow, Red and Blue. 3. Bowl Size 2.25 Inches. 4. Service Pressure 500 PSI. 5. Acceptance Pressure 1000 PSI. 6. Length 50-foot sections. 7. Ultimate Tensile Strength - Shall not be less than 1200 psi. 8. Ultimate Elongation - Shall not be less than 200%. 9. Adhesion - Between reinforcement and liner shall be a minimum of 20 pounds. 10. Chemical Resistance - Exposure to seawater and contamination by most chemicals will have no effect on the short- or long-term performance of the hose. 11. Hose shall meet NFPA 1961 standards. 12. The maximum weight gain shall not exceed 3 pounds per 50' length. 13. Outer jacket shall be woven from stable polyester yarns over an inner liner. 14. Hose shall be heat resistant, drag resistant and kink resistant. 15. Accelerated ageing test shall meet requirements of UL 19. 16. Ozone resistance shall show no signs of visible cracking of the cover of liner when tested in accordance with ASTM D1149-91 and ASTM D518-86. 17. The year manufactured shall be stenciled on the hose body and die stamped on each male and female coupling. 18. Hose shall carry a 10-year written warranty, which includes a 1-year all hazards warranty 19. Couplings a. U.S. Brand Only b. Thread sizes are in table 1 below. c. 6061 T6 Aircraft Aluminum Alloy, Hard Anodized, Seamless Extrusion ITEM 2: SPECIFICATIONS 2 inch KEY FIRE HOSE, MAGNUM/MAGLITE NYLON 6.6 DOUBLE JACKET DN25-800 1. Hose shall be new and unused. 2. Color Orange. 3. Bowl Size 3.0 Inches. 4. Service Pressure 400 PSI. 5. Acceptance Pressure 800 PSI. 6. Length 50-foot sections. 7. Hose shall meet NFPA 1961 standards. 8. The adhesion between the tube and jacket shall meet a minimum requirement of 12 pounds on a 1 1/2" strip when tested in accordance with UL-19 standards. 9. Minimum tensile strength requirements for the finished tube shall be 1800 psi. 10. Hose shall be heat resistant, drag resistant and kink resistant. 11. The minimum burst test pressure, when tested in accordance with NFPA 1961 shall be 1200 psi. 12. The year manufactured shall be stenciled on the hose body and die stamped on each male and female coupling. 13. Hose shall carry a 10-year written warranty. 14. Couplings a. U.S. Brand Only b. Thread sizes are in table 1 below. c. 6061-T6 Aircraft Aluminum. ITEM 3: SPECIFICATIONS 2 inch KEY FIRE HOSE, COMBAT READY DP25-1000 1. Hose shall be new and unused. 2. Color Yellow. 3. Bowl Size 3.0 Inches. 4. Service Pressure 500 PSI. 5. Acceptance Pressure 1000 PSI. 6. Length 50-foot sections. 7. Ultimate Tensile Strength - Shall not be less than 1200 psi. 8. Ultimate Elongation - Shall not be less than 200%. 9. Adhesion - Between reinforcement and liner shall be a minimum of 20 pounds. 10. Chemical Resistance - Exposure to seawater and contamination by most chemicals will have no effect on the short- or long-term performance of the hose. 11. Hose shall meet NFPA 1961 standards. 12. The maximum weight gain shall not exceed 3 pounds per 50' length. 13. Outer jacket shall be woven from stable polyester yarns over an inner liner. 14. Hose shall be heat resistant, drag resistant and kink resistant. 15. Accelerated ageing test shall meet requirements of UL 19. 16. Ozone resistance shall show no signs of visible cracking of the cover of liner when tested in accordance with ASTM D1149-91 and ASTM D518-86 17. The year manufactured shall be stenciled on the hose body and die stamped on each male and female coupling. 18. Hose shall carry a 10-year written warranty, which includes a 1-year all hazards warranty 19. Couplings a. U.S. Brand Only b. Thread sizes are in table 1 below. c. 6061 T6 Aircraft Aluminum Alloy, Hard Anodized, Seamless Extrusion

Bid Related Documents

Download Document

Bid Related Attachments

Download Attachment Download Attachment

Product Code: 34056

Agency Information


Issuing Agency: City of Cincinnati

State: Ohio

Agency Type: State and Local

Contact: Alexa Kafury 805 Central Avenue, Ste. 234, Cincinnati, Ohio, 45202-1947

Phone: 513-352-3277

Email: alexa.kafury@cincinnati-oh.gov

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW