Government Contract | Alabama
62K lb capacity service platform lift

Bid Information

Bid Alert No: 00002255311

Bid Title: 62K lb capacity service platform lift

Agency Bid No. Title: RFB 012 20000000957

Received Date: 07/14/2020

Close Date: 07/29/2020

Purchase Type: Not Stated

Delivery Point:

Delivery Date: Not Stated


Specifications include, but are not limited to: Minimum 62,000 Capacity 4-Post LiftSurface Mounted PlatformNo Post, No CrossbeamsLift Shall have ISO 9001 CertificationStertil Koni SKY 200-26 or EqualYou MUST List your Make and Model below. Failure to do so will result in a Rejected RFB.MAKE:MODELPrice must include installation excluding electrical and training.ALDOT personnel will perform all electrical work.Minimum 1-year manufacture warranty, parts and labors included.To include shipping to Tuscaloosa AL.Minimum lifting Capacity: To be 62,000lbs or greater.Minimum Platform length: Platform length to be minimum of 26, to be a one-pieceplatform.Platform width: Minimum Platform width is 29.5.Platform lifting height: To be 69 above finished floor.Between Platform width: To be a minimum of 44 total overall width is 105.Retracted Height of Platform: Minimum of 13.75 retracted height from floor.Plat Form Ramps: minimum of 77 in length.Platform Safety Devices: Each lifting device shall be provided with a positionmeasuring device identified as an inclinometer whose function is to safely calculateand synchronize the height of the lifting devices. The lift system shall incorporatea splash proof electrical system so that the lift can be used in a washroomenvironment. Platform locking mechanism shall be activated for safety in no lessthan 4 inches of lifting height to ensure safe lifting at all positions. The lift systemshall be equipped with a minimum of 22 mechanical safety lock positions on eachleg.Platform lighting: Lighting on inside of platforms, to be shatterproof 24-volt LED lighttubes.Platforms: To be provided with factory installed anti-skid coating, and factoryinstalled air supply kit.Platform Jacks: Minimum of 2 Hydraulic Jacking Beams, with a capacity of minimumof 26,000lbs or greater.Drive Mechanism: The drive system shall be hydraulic. The hydraulic power unitshall be an electrically-powered pump, flow control valves, and a fluid reservoir.Hydraulic lifting cylinders shall be of a piston type to prevent leakage in the case ofpiston damage. All rotating axles shall be made of stainless steel.Price must include installation and training.Minimum 1-year manufacture warranty, parts and labors included.To include shipping to Tuscaloosa AL.

Product Code: 07544

Agency Information

Issuing Agency: State of Alabama - Department of Finance

State: Alabama

Agency Type: State and Local

Contact: Patrick Hemme 100 N. Union St., Suite 192, Montgomery, Alabama, 36104

Phone: 334-242-7173




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing