Government Contract | Utah
21-18 Vac Truck - Power Dept.

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information

Bid Alert No: 00002696558

Bid Title: 21-18 Vac Truck - Power Dept.

Agency Bid No. Title: MURR202215983

Received Date: 07/26/2021

Close Date: 07/30/2021

Purchase Type: Not Stated

Delivery Point: Murray, Utah

Delivery Date: Not Stated


Specifications include, but are not limited to: 5.01 The specification herein states the minimum requirements of Murray City Power. All bids must beregular in every respect. Unauthorized conditions, limitations, or provisions shall be cause forrejection. Any bid not prepared and submitted in accordance with the bid document andspecification, or any bid lacking sufficient technical literature to enable Murray City Power tomake a reasonable determination of compliance to the specification will be considered"non-responsive" and grounds for rejection.6.0 SUBFRAME6.01 The equipment shall be of modular design consisting of a water tank system, debris body, anddrive system.6.02 A sub frame shall be fabricated to the exact dimensions of the truck chassis for mounting ofmodular components.6.03 All components of the module shall attach to the sub frame and not directly to the chassis.6.04 Sub frame shall be designed to ASME standards for maximum applied loads, chassis framemovement and even distribution of weight to the chassis and suspension.6.05 Sub frame shall be continuous and uninterrupted from back of cab to end of frame.7.0 DEBRIS BODY7.01 Efficiency of air movement through debris body will be measured for minimal restriction asmeasured by vacuum pressure gauge while operating blower at full speed. Pressure dropthroughout entire system (from 6" hose inlet to blower inlet) including specified filtration andblower protection devices shall be no greater than 3" hg as measured at blower.7.02 The body shall be cylindrical having a minimum useable capacity of 675 U.S. gallons.7.03 The debris storage body shall be constructed with a minimum 3/16" corrosion and abrasionresistant Ex-Ten steel.7.04 The debris storage body shall have a minimum yield point of 50,000 PSI and a minimum tensilestrength of 70,000 PSI.7.05 Industrial style rear debris body door shall be flat, and shall open and close hydraulically bycylinders mounted at the top of the body. Door shall open 70 degrees from the fully closedposition. Door shall be unlocked, opened, closed, and locked by a failsafe hydraulically activatedsequential positive locking system, cam operated by a single hydraulic cylinder, with all controlslocated behind truck cab, forward of the debris body, so operator is not subject to debris whendumping.7.06 Rear door locking system shall be designed such that no hydraulic components are locatedinternal of the debris body to prevent debris contamination and excessive wear of hydrauliccomponents7.07 Manual locks will not be permitted7.08 Dual top mounted hydraulic cylinders shall permit the operator to raise and lower the rear door.Door open/close shall be completed hydraulically with no hydraulic components located internalof the debris body to prevent debris contamination, excessive wear of hydraulic components, andmaterial contamination.7.09 The rear door shall have a 6" flanged port opening with cap supplied on the lower portion of therear door.7.10 Material shall be offloaded via a raising/dumping body to a 50-degree angle, utilizing a forwardmounted, double acting, hydraulic dump cylinder. Pusher plate or sweeper offload systems arenot acceptable due to their potential for material contamination, wear and tear on hydrauliccomponents, and confined space maintenance requirements.7.11 Debris body shall have a rear door that is hinged at the top and is equipped with a replaceableneoprene type seal. Adjustable for periodic compensation of door seal wear.

Bid Related Documents

Download Document

Bid Related Attachments

Download Attachment Download Attachment

Product Codes: 07200, 06578

Agency Information

Issuing Agency: City of Murray

State: Utah

Agency Type: State and Local

Contact: Laura Bown

Phone: 801-264-2663




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing