Government Contract | North Dakota
2020 or 2021 Compact Track Loader and attachements

Bid Information


Bid Alert No: 00002424328

Bid Title: 2020 or 2021 Compact Track Loader and attachements

Agency Bid No. Title: 2020-5

Received Date: 12/03/2020

Close Date: 12/14/2020

Purchase Type: Not Stated

Delivery Point: 205 3rd St. SE, New Rockford, North Dakota, 58356

Delivery Date: Not Stated

Specifications

Specifications include, but are not limited to: EngineYes No Deviations1.Engine shall be at least 92 HP ___ ___ ______________ 2.Dual element air cleaner with an indicator ___ ___ ______________3.Must be turbocharged ___ ___ ______________4.Must be liquid cooled ___ ___ ______________5.Must have cold weather start assist ___ ___ ______________ 6.Must have a fuel filter with water separator ___ ___ ______________7.Must have 1500 watt 120 volt (not 240 volt) block heater ___ ___ ______________8.Meet tier IV standards___ ___ ______________Bucket1. Must be a 86" severe duty bucket ___ ___ ______________2. Must have a bolt on cutting edge ___ ___ ______________3.Self-leveling bucket ___ ___ ______________Weight1. The operating weight must not exceed 11,000 lbs and no less than 10,200 lbs ___ ___ _______________ 2. Tipping load must be at least 9,900 lbs ___ ___ _______________Dimensions1.Overall length with bucket on ground shall not exceed 151" ___ ___ ______________2.Height to hinge pin at max. height shall be at least 128.8" ___ ___ ______________3. Dump height with standard bucket shall be at least 97" ___ ___ ______________4. Ground clearance shall be at least 8.0" ___ ___ ______________5. Shall not exceed 78" wide to the outside of tracks ___ ___ ______________Hydraulic System1. Standard flow must be at least 21 gpm and 3000 psi ___ ___ ______________2.High flow must be at least 33 gpm and 4000 psi ___ ___ ______________3.Variable flow and maximum flow auxiliary hydraulics shall be standard ___ ___ ______________4.High flow hydraulics shall have system relief pressure throughauxiliary circuit for high flow hydraulic attachments ___ ___ _____________5.Hydraulic oil cooler shall be standard ___ ___ _____________6.Engine/Hydraulics system shutdown shall provide automaticengine shutdown to prevent loader damage 7.Standard auxiliary hydraulics shall include flush face style quick couplers that can be pushed in to release trapped line pressures ___ ___ _____________8. Loader operation shall be raise, lower, tilt, and dump controlled by right hand lever ___ ___ _____________9 Able to release hydraulic oil pressure on auxiliariesby pushing coupler inward ___ ___ _____________10. Hydraulics shall be electric over hydraulic ___ ___ _____________11. Loader shall have a vertical lift ___ ___ _____________12. Two speed transmission ___ ___ _____________13.Hydraulic quick release for removing attachments

Bid Related Documents

Download Document

Amendments

Download Amendment

Product Code: 76051

Agency Information


Issuing Agency: Garrison Diversion Conservancy District

State: North Dakota

Agency Type: State and Local

Contact: Darren Murray 401 Highway 281 NE, P.O. Box 140, Carrington, North Dakota, 58421

Phone: 701-363-2950

Email: darrenm@gdcd.org

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW