Government Contract | Kansas
Wheel Loader

Bid Information

Bid Alert No: 00000415987

Bid Title: Wheel Loader

Agency Bid No. Title: 16-75

Received Date: 11/11/2015

Close Date: 12/01/2015

Purchase Type: Not Stated

Delivery Point: Hutchinson, Kansas

Delivery Date: Not Stated

Special Notices: Warranty Required


Specifications include, but are not limited to:Loader to be 2016 or newer year model Machine shall have an Enclosed Cab with AC & Heat. Engine rated net power shall be at a minimum of 186 HP according to ISO 9249 at 1800 RPM. Engine maximum net power shall be at a minimum of 188 HP according to ISO14396 at 1800 RPM. Machine width over tires shall be no wider than 8'9" Machine wheelbase length shall be no shorter than 10'0" Machine height shall not exceed 10'11" Machine bucket clearance at maximum lift and level bucket shall be a minimum height of 11'11" Machine bucket pin height shall be a minimum of 13'0" 2.7 CYD (2.1 m3) or larger, Multi-Purpose (4 in 1) with Fusion style hooks to use on existing loaders. Fusion Style Quick Coupler Machine shall weigh a minimum of 36,000 lbs. ENGINE Engine shall be manufactured by the equipment manufacturer. Engine shall be US EPA Tier 4 Final / EU Stage IV compliant and Tier 4 Final compliance certificate shall be available upon request. Engine shall be equipped with a system that uses, Exhaust Gas Recirculation (EGR), a Diesel Oxidation Catalyst (DOC), a Diesel Particulate Filter (DPF) and Selected Catalytic Reduction (SCR) Regeneration shall be passive and not require any input from operator or disrupt work. Engine after-treatment system shall use Diesel Exhaust Fluid (DEF) to meet emission requirements DPF Service Life shall extend to the life of the engine. Machine shall have Fuel and DEF leve gages on the primary display to help with fluid fill management. DEF tank shall be located away from the diesel fuel tank and configured with a blue cap to prevent fluid mix up. Engine shall be minimum of 7 L six-cylinder, with electronically controlled fuel injection for precise timing. Machine shall have a remaining time until fuel fill on an optional secondary display to help with fluid management. Machine shall allow DEF fluid to be purged automatically even when the machine power disconnect key is switched to the OFF position. Engine shall be direct injection turbocharged with waste gate turbocharger for reliability, durability and performance. Engine shall have a high pressure common rail fuel system with an oil lubricated fuel pump

Bid Related Documents

Download Document

Product Code: 76051

Agency Information

Issuing Agency: City of Hutchinson

State: Kansas

Agency Type: State and Local

Contact: Marjorie K. Bryant, Finance Department City Clerk, 125 East Ave B, P.O. Box 1567, Hutchinson, Kansas, 67501

Phone: 620-694-1970

Fax: 620-694-1900




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing