Government Contract | Rhode Island
Weatherproofing: 269 Melrose Street

Bid Information

Bid Alert No: 00000438257

Bid Title: Weatherproofing: 269 Melrose Street

Agency Bid No. Title: 16-13

Received Date: 12/11/2015

Close Date: 12/22/2015

Purchase Type: Not Stated

Delivery Point: 269 Melrose Street, Providence, Rhode Island

Delivery Date: Not Stated

Special Notices: Performance Bond Required: 100%, Payment Bond Required: 100%, Bid Bond Required: 5%, Warranty Required


Specifications include, but are not limited to:The Rhode Island Public Transit Authority is soliciting bids to provideweatherproofing services as specified below to the Building located at 269Melrose Street Providence, RI 02907. A drawing and photographs canbe found in Appendix A.Please note: There is an Upper portion and a Lower portion of thisBuilding as identified in Appendix A. The Upper and Lower portions of theBuilding are adjoined and share a common wall.All requested work will be performed on both Upper and Lowerportions of this Building, with the exception of item E. WaterproofingLower Building Exterior:A. Seismic Joint Replacement:This work shall consist of the removal of current exterior seismicjoint material, cleaning and preparing the cavity, for the installationof Emseal Seismic Color Seal or approved equal at the building,located at 269 Melrose Street in Providence, RI. The externalfacing color of this material shall be as close in color as is thebuilding block material.1) There are six seismic joint areas which will be replaced.2) Each joint is approximately 2.0 to 2.50 wide.3) Two of the joints are roughly 16.0 in length.4) Four of the joints are roughly 28.0 in length.5) The material will be installed from the bottom of the joint tounderneath the wall cap flashing material.6) One joint at the So. East wall will also have the interiorportion of the joint sealed. This is to protect the joint fromBus Wash water overspray, during RIPTAs daily Buswashing operations.7) This inner joint will be cleaned and prepared to accept newbacker rod and sealed with Sika 2C multi component orapproved equal polyurethane.B. Control Joint Replacement:This work shall consist of the removal of current exterior controljoint material, cleaning and preparing the cavity, and the installationof new backer rod and reseal with Dymonic 100 or approved equalmaterial.There are roughly 1350 of control joint material to be replaced

Bid Related Documents

Download Document

Bid Related Attachments

Download Attachment Download Attachment

Product Codes: 91000, 91078, 91400

Agency Information

Issuing Agency: Rhode Island Public Transit Authority

State: Rhode Island

Agency Type: State and Local

Contact: Michael J. McGrane, Purchasing Department Purchasing Department, Room 217, 705 Elmwood Avenue, Providence, Rhode Island, 02907

Phone: 401-784-9500




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing