Government Contract | New Hampshire
Water Mains and Service Materials

Bid Information

Bid Alert No: 00000497636

Bid Title: Water Mains and Service Materials

Agency Bid No. Title: FY16-804-51

Received Date: 02/29/2016

Close Date: 03/17/2016

Purchase Type: Not Stated

Delivery Point:

Delivery Date: Not Stated


Specifications include, but are not limited to:Bolted Coupling - The body and rings shall be carbon steel with a fusion bonded epoxy coating. The bolts and nuts shall be Type 304 stainless steel with the nuts coated with an anti-seize compound. The gasket shall be made in two layers with a removable inner layer that allows for diameter range expansion. Bolted Couplings shall be Hymax or Smith-Blair Top Bolt 421. Gate Valve Boxes Special Note: A typical sample of a complete gate valve box must be available for evaluation within 48 hours of bid opening, if requested. Gate valve boxes shall be cast iron and for water use only (marked "water"), and shall have the following characteristics: a. Flange shall be located at top of top section. b. Bottom section shall be bell base. c. Boxes shall be two-piece with covers; thirty-six (36) inch bottoms and twenty (26) inch tops. d. Boxes shall have slip-tight shaft; five and one-quarter (5-1/4) inches. e. Gate box covers shall fit properly and seat flush in the gate valve box top section. f. Gate box extensions shall properly fit the gate valve box top section and be Buffalo #B-5181or equal. g. Gate box shall be made in the United States of America or Canada (with approval). h. Gate box extensions shall accept standard gate box cover. Curb Boxes, Small Special Note: A typical sample of the curb box and rod must be available for evaluation within 48 hours of bid opening, if requested. Curb boxes shall be manufactured in the United States of America. Adjustment: Twelve (12) inches. Cover: Heavy duty, slotted, with counter sunk pentagon solid brass plug, coarse thread. Length: Adjustable, 5ft. to 6ft. Pattern: Arch type to be used with curb stop sizes three-quarter (3/4) and one (1) inch. Rod: One-half (1/2) inch offset stainless steel rod with stainless steel yoke, thirty (30) inches in length. Upper Extension: One (1) inch.

Bid Related Documents

Download Document

Product Codes: 65828, 65917, 65985, 65941, 65933, 65890, 65940, 65987, 65916, 65927, 65944, 65846

Agency Information

Issuing Agency: City of Manchester

State: New Hampshire

Agency Type: State and Local

Contact: Environmental Protection Division, 300 Winston Street, Manchester, New Hampshire, 03103



FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing