Government Contract | Texas
UTSW Medical Center North Campus Roof Repairs

Bid Information

Bid Alert No: 00000492742

Bid Title: UTSW Medical Center North Campus Roof Repairs

Agency Bid No. Title: 729-16-22

Received Date: 02/23/2016

Close Date: 03/25/2016

Purchase Type: Not Stated

Delivery Point:

Delivery Date: Not Stated

Special Notices: Questions Due By 03/16/2016 10:00 AM, Pre-Bid Conference Mandatory 03/04/2016 10:00 AM


Specifications include, but are not limited to: RESIN FLASHING INSTALLATIONA. Pre-cut all reinforcing fleece for repairs indicated and set aside.B. Apply base coat of resin flashing over the installed cap ply membrane or existing lead flashing,or other substrate indicated and while still wet, embed pre-cut reinforcing fleece into wet resin.C. Lap reinforcing fleece a minimum of 2-inches at all joints. Cut fleece neatly to fit all repairconditions without a buildup of multiple layers. Work wet membrane with a brush or roller toeliminate blisters, openings, or lifting at corners, junctions, and transitions.D. Apply topcoat of resin flashing over reinforcing fleece.E. Install finish coat of resin flashing after a minimum of 24 hour cure time for finish coat.3.13 PITCH PAN REPLACEMENTA. Cut out roof membrane as needed to remove existing, failed pitch pans, taking care to preserveexisting blocking.B. Install new pitch pan as specified, secure to existing blocking or adhere in place per manufacturerrecommendations. Strip in to existing roof membrane in accordance with this specification andmanufacturer recommendations.C. Fill new pitch pan with pourable elastomeric sealant as recommended by manufacturer.3.14 FIXED LADDER INSTALLATIONA. Wall mount in a manner similar to existing ladders at adjacent mechanical enclosures to resistrequired loading.3.15 FIELD QUALITY CONTROLA. Testing Agency: Owner will engage qualified, independent, testing and inspecting agency toperform roof inspections and tests, and to prepare reports.B. Architect/Engineer will inspect roofing system at various stages of construction and atcompletion prior to installation of aggregate surfacing.

Product Code: 91473

Agency Information

Issuing Agency: University of Texas Southwestern Medical Center

State: Texas

Agency Type: State and Local

Contact: Curtis White, Physical Plant - Purchasing

Phone: 214-648-3178

Fax: 214-648-2901




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing