Government Contract | California
TRUCK SCALE REPLACEMENT

Bid Information


Bid Alert No: 00000534780

Bid Title: TRUCK SCALE REPLACEMENT

Agency Bid No. Title: 780-5464

Received Date: 04/08/2016

Close Date: 05/05/2016

Purchase Type: Not Stated

Delivery Point:

Delivery Date: Not Stated

Special Notices: Pre-Bid Conference Optional 04/13/2016 10:00 AM, Questions Due By 04/19/2016 10:00 AM

Specifications

Specifications include, but are not limited to:GENERAL PROVISIONS1.1 Furnish and install one concrete deck motor truck scale and associated electronic controls. 1.2 The scale shall have a clear and unobstructed weighing surface of not less than 70 feet long and 10 feet wide. 1.3 The scale shall have a profile of 14-1/2 inches, which is measured from the top of the scale to the top of the foundation slab or pier at the load cell bearing points. 1.4 The scale shall be fully electronic in design and shall not incorporate any mechanical weighing elements, check rods, or check stays. 1.5 The scale shall be designed to perform as a single weighing platform and shall be of flat-top design. Side rail support beams are not acceptable. 1.6 The scale shall have a gross weighing capacity of 100 tons. 1.7 The scale shall have a Concentrated Load Capacity (CLC) of 100,000 pounds. 1.8 The scale shall be designed to accept vehicles that generate up to 80,000 pounds per tandem axle.

Bid Related Documents

Download Document

Amendments

Download Amendment

Product Codes: 78095, 92969

Agency Information


Issuing Agency: County of Fresno

State: California

Agency Type: State and Local

Contact: Jennifer Anderson County of Fresno Purchasing, 4525 E. Hamilton Avenue, 2nd Floor, Fresno, California, 93702

Phone: 559-600-7115

Email: countypurchasing@co.fresno.ca.us

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW