Government Contract | New Hampshire
TRUCK BODIES, CROSS MEMBER-LESS DUMP BODIES WITH CAB PROTECTORS

Bid Information


Bid Alert No: 00000480776

Bid Title: TRUCK BODIES, CROSS MEMBER-LESS DUMP BODIES WITH CAB PROTECTORS

Agency Bid No. Title: 109-16

Received Date: 02/08/2016

Close Date: 02/16/2016

Purchase Type: Not Stated

Delivery Point: Department of Transportation, 33 Smokey Bear Blvd., Concord, New Hampshire, 03301

Delivery Date: Not Stated

Special Notices: Questions Due By 02/10/2016 04:00 PM, Warranty Required

Specifications

Specifications include, but are not limited to: Minimum 8 gauge abrasion resistant Hi- Tensile steel construction throughout having a minimum 50,000 PSI yieldstrength except where material required is specifically noted later in this paragraph. The underside of the bodys structure shall not have any open areas that would allow material to gather in andbuild up and to also help facilitate cleaning the body underneath. Sides shall be reinforced with a formed top rail, formed rub rail and one (1 ea.) 8 min, full length sloped, formedhorizontal brace between the top rail and rub rail per side and include 2 ea. additional 3/8 steel triangular shaped tiedown plates per side with a 2 hole located between the top and middle horizontal box brace, located 15s from the frontand 21-1/2 from the rear. All body plates, including floor, shall be one piece (splicing not allowed). All welds in the body are to be continuous. (Fully Welded) Body outside dimension shall not be less than 95-1/2 +/- 1/4 over wheels/tires. Body inside dimensions shall be 9 long by 7 wide, with 24 sides, 4-cubic yard water level with 6-cubic yard ends. Front sideboard pockets to be same height as cab shield and shall include a 13/16 hole located 46 on center up from thebody floor. Further reinforced with a X 5 X 2-1/2 stainless steel plate with a 13/16 hole shall be welded in placeexternally on the front of the pockets.

Bid Related Documents

Download Document

Product Codes: 06500, 06530

Agency Information


Issuing Agency: State of New Hampshire - Department of Administrative Services

State: New Hampshire

Agency Type: State and Local

Contact: Alan Hofmann, Bureau of Purchase and Property Bureau of Purchase and Property, 25 Capitol Street, Concord, New Hampshire, 03301

Phone: 603-271-2550

Fax: 603-271-7564

Email: alan.hofmann@nh.gov

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW