Government Contract | California
TRASH PUMP AND SUMP PUMP

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information


Bid Alert No: 00000442093

Bid Title: TRASH PUMP AND SUMP PUMP

Agency Bid No. Title: 82357

Received Date: 12/16/2015

Close Date: 12/21/2015

Purchase Type: Not Stated

Delivery Point: 16800 Aster Road, Adelanto, California, 92301

Delivery Date: Not Stated

Special Notices: Questions Due By Optional 12/19/2015 02:00 PM, Bidder Preregistration

Specifications

Specifications include, but are not limited to:NAICS: 333911PUMP, TRASH, ENGINE DRIVEN, GASOLINE FUELED, 2" NPT INLET, 2" NPT OUTLET, 163CC ENGINE SIZE, 3.3 QUART FUEL TANK CAPACITY, 24-1/2" LENGTH, 18" WIDTH, 18" HEIGHT, CAST IRON ENGINE CONSTRUCTION, CAST IRON IMPELLER, TRASH TYPE IMPELLER, SILICON CARBIDE SEAL MATERIAL, SOLID HANDLING CAPACITY OF 13/16", 42 PSI MAXIMUM PRESSURE, 3900 RPM ENGINE, 98 FOOT MAXIMUM HEAD, 26 FOOT MAXIMUM SUCTION LIFT, CAST-IRON/STAINLESS WEAR PLATE, SILICON CARBIDE MECHANICAL SEAL, BUNA N CHECK VALVE, STEEL ROLL BAR FRAME, 1 IMPELLER, 0 DEGREES TO 130 DEGREES F TEMP. RANGE, ELECTRONIC ENGINE TYPE, LOW OIL SENSOR, SELF-PRIMING, TRASH APPLICATION, 174 GPM OF WATER @ 10 FT. OF HEAD, 162 GPM OF WATER @ 20 FT. OF HEAD, 149 GPM OF WATER @ 30 FT. OF HEAD, 134 GPM OF WATER @ 40 FT. OF HEAD, 117 GPM OF WATER @ 50 FT. OF HEAD, 98 GPM OF WATER @ 60 FT. OF HEAD, 74 GPM OF WATER @ 70 FT. OF HEAD, 50 GPM OF WATER @ 80 FT. OF HEAD, 25 GPM OF WATER @ 90 FT. OF HEAD."GRAINGER" #6DLY4 "HONDA" #WT20XK4ACNAICS: 333911PUMP, SUMP, DEWATERING/UTILITY, 1/2 HP, 115 VOLT, 5 AC AMPS, 20 FT. CORD LENGTH, 16/3 ELEC. CORD SIZE, SJTW CORD TYPE, 2" DISCHARGE NPT, 58 GPM OF WATER @ 5 FT. OF HEAD, 54 GPM OF WATER @ 10 FT. OF HEAD, 49 GPM OF WATER @ 15 FT. OF HEAD, 42 GPM OF WATER @ 20 FT. OF HEAD, 34 GPM OF WATER @ 25 FT. OF HEAD, 22 GPM OF WATER @ 30 FT. OF HEAD, 37 FT. OF MAXIMUM HEAD, 12" HEIGHT, 7-5/16" DIAMETER, STAINLESS STEEL HOUSING, STAINLESS STEEL TOP MATERIAL, CAST IRON BASE MATERIAL, RUBBER IMPELLER MATERIAL, 7-5/16" LENGTH, 8" WIDTH, 3/16" MAX. DIA. SOLIDS, 104 DEGREES F MAX. LIQUID TEMP., PSC MOTOR TYPE, ALUMINUM MOTOR ENCLOSURE, MUST HAVE THERMAL PROTECTION, ALUMINUM MOTOR HOUSING, 1 PHASE, 3450 RPM, 60 Hz, BALL BEARING TYPE, STAINLESS STEEL SHAFT MATERIAL, CARBON/CERAMIC, SILICON CARBIDE SHAFT SEAL,CONTINUOUS DUTY, THERMOPLASTIC HANDLE, GENERAL CONSTRUCTION/DEWATERING APPLICATION, oCSAus AGENCY COMPLIANT, 2 YEAR WARRANTY. "GRAINGER" #5EAF8 "LITTLE GIANT" #FLS-400

Bid Related Documents

Download Solicitation Notice

Product Codes: 72073, 72079

Agency Information


Issuing Agency: Los Angeles Department of Water and Power

State: California

Agency Type: State and Local

Contact: Stephanie Tong 16800 Aster Road, Adelanto, California, 92301

Phone: 213-367-5051

Email: stephanie.tong@ladwp.com

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW