Government Contract | Florida
Temporary Traffic Separator (Temporary Curbing) Re-Advertisement

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information

Bid Alert No: 00000590636

Bid Title: Temporary Traffic Separator (Temporary Curbing) Re-Advertisement

Agency Bid No. Title: ITB-DOT-15/16-3045WE

Received Date: 06/03/2016

Close Date: 06/13/2016

Purchase Type: Not Stated

Delivery Point: Florida

Delivery Date: Not Stated

Special Notices: Bidder Preregistration


Specifications include, but are not limited to:Curbing:The product shall consist of pieces of raised curb that can be installed so that varying lengths of continuous curb can be achieved. The curb shall be available in white or yellow. While the curb shall be mountable, in case of an emergency, the height shall be at least 3 inches to deter drivers from driving over it. The curb shall have end caps to provide a smooth transition from pavement elevation to the height of the top of the curb pieces. The curb shall be made so that flexible posts can be mounted at intervals not to exceed four feet measured along the length of the continuous curb. The flexible posts shall be easily installed and removed. When subjected toa crushing force of 3,500 pounds per square inch (psi), a representative section of the curb must recover to a minimum of ninety percent of its original height within twenty-four hours.Reflective material shall be used to increase the visibility of the curb itself at night. The curbing shall be such that it can be handled and assembled easily by a single worker at the project site,without specialized equipment. The curbing will be used to close off an area or to guide vehicles.Use of the curbing shall not cause damage to the roadway. The curbing and posts must be on the Florida Department of Transportation Qualified Products List (QPL) and meet all of the specifications used to determine compliance with the QPL. Bidder must provide documentation to show his/her product and company is on the QPL. In addition, the system shall have Department approval for use in permanent applications for retro-fit of existing roadways. Posts:The flex post shall be a circular white post. The diameter of the top half of the post shall be between 4.5 and 5 inches. The diameter of the bottom half of the post shall be between 5 and 9 inches. The height of the flex post when mounted shall be between 32 and 37 inches. At a minimum, the top half of the post shall include two 4 inch bands of high intensity reflective material. The reflective material shall be available in white and yellow and will be specified byte Florida Department of Transportation when an order is placed. The Department may order flexible posts in other sizes so that maintenance can be done to older installations that used other flex post models. Vendor shall provide a circular white post with a height when mounted between 39 and 41 inches. The diameter of the top half of the post shall be between 4.5 and 5 inches.

Bid Related Documents

Download Document


Download Amendment

Product Code: 91319

Agency Information

Issuing Agency: State of Florida - Department of Transportation

State: Florida

Agency Type: State and Local

Contact: Wynne Edwards 605 Suwannee Street, Tallahassee, Florida, 32399

Phone: 850-330-1374

Fax: 850-330-1494




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing