Government Contract | North Dakota
Tape, Pavement Marking - Preformed Patterned

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information

Bid Alert No: 00000483366

Bid Title: Tape, Pavement Marking - Preformed Patterned

Agency Bid No. Title: 550-72-16-050

Received Date: 02/11/2016

Close Date: 02/23/2016

Purchase Type: Term: 03/01/2016 - 02/28/2017

Delivery Point: North Dakota

Delivery Date: Not Stated

Special Notices: Questions Due By 02/16/2016 02:00 PM, Bidder Preregistration, Warranty Required


Specifications include, but are not limited to:The markings shall be manufactured and packaged to permit storage at the manufacturers recommended shelf life for a period of not less than one year from the date of purchase. Legends and symbols shall meet the applicable shapes and sizes. B. Composition.Provide retroreflective pliant polymer pavement markings that consist of a mixture of polymetric materials, pigments and glass beads distributed throughout its base cross-sectional area, with a reflective layer of ceramic beads bonded to a polyurethane topcoat surface. Provide material with a patterned surface with between 35 and 65 percent of the surface area raised and presenting a near vertical face to traffic approaching from all directions. Ensure the channels between the raised areas are substantially free of exposed beads or particles. Provide material that has minimal exposed beads and particles between the raised areas. Provide preformed markings that conform to pavement contours by the action of traffic. Provide pavement markings applied using a pressure sensitive adhesive in accordance with the manufacturers instructions. Provide markings that are immediately ready for traffic after application. C. Skid Resistance. Provide tape that has a surface that provides an initial minimum skid resistance value of 45 BPN when tested according to ASTM E 303. Obtain the values at downweb and at 45 degree angle from downweb. Average the two values to find the skid resistance of the patterned surface. D. Thickness. Provide patterned material that, without adhesive, has a minimum thickness of 65 mils at the thickest portion of the patterned cross-section and minimum thickness of 20 mils at the thinnest portion of the cross-section.

Bid Related Documents

Download Document

Product Codes: 55004, 55072

Agency Information

Issuing Agency: State of North Dakota - Department of Transportation

State: North Dakota

Agency Type: State and Local

Contact: Alexis Wingo Procurement Section, 608 East Boulevard Avenue, Bismarck, North Dakota, 58505

Phone: 701-328-2571




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing