Government Contract | New York
Tangential double crossover; crossover

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information

Bid Alert No: 00000551650

Bid Title: Tangential double crossover; crossover

Agency Bid No. Title: 0000131171

Received Date: 04/22/2016

Close Date: 06/17/2016

Purchase Type: Not Stated

Delivery Point:

Delivery Date: Not Stated


Specifications include, but are not limited to:Double Crossover to be delivered complete with Switch Slide Plates, Gauge Plates (UAP, UAQ & UAR), Special SwitchHeel Plates, Head Hardened Switch Points, Stock Rails, RBM Frogs, Switch Rods, 5 Type A & 4 Type B (1 flangeway)Fiberglass Insulated Joints; 20 Rolled Steel Joint Fillers Blocks 36 long and, all Fittings on the Portiondrawing MT-2806R Rev. A Sheets 1 & 2 except for Ties, Screw Spikes, Cut Spikes and Elastic Rail Clips. All rails to be head-hardened 100-8 rail as per Drawing T-2001 Sheet 1 DT-7; Guard Rails as per Drawing T-2006Sheet 1 DT-6, Insulated Joints as per Drawing T-2080A DT-9; Crossing Center & End Frogs as per Drawing T-2174 DT-3. Turnout Frogs as per T-2196 DT-9. Frogs to be RBM and with medium wall thickness and longitudinal and transversetoe and heel end casting transitions and flangeway as per Drawing T-2196 DT-9 and T-2174 DT-3. Switch Point andSwitch Details as per Drawings T-2295 DT-2 and T-2140 DT-6 (for reference). Adjustable Rail Brace as per T-2012ADT-4. All plates shall be made for use with Pandrol e2055/PR 601A elastic clips or approved equal as per drawings T-2295DT-2, T-2015 Sheet 2 DT-7, Sheet 3 DT-6 only for (D1, DX1 & A1) plates; T-2016 DT-6; T-2017 Sheet 1 DT -14;T-2022 Sheet 1 DT- 5, Sheet 2 DT-4 only for (OA, UA & NA) plates & Sheet 3 DT-3; T-2024 DT-3 only for Plates (T1,T2, K1 & K2). Toe and Heel Frog Plates as per Drawing T-2015 Sheet 4 DT-2. Double-Tie Frog Plates as per Drawing T-2196 DT-9 andpaired-off Pandrol Self-Aligning Shoulder Plates shown on T-2196 DT-9 shall be replaced by single Frog Heel Plateswith weld-on shoulders. Switch Gauge Plates shall be extended for switch machine mounting as shown on the PortionDrawing. Switch Heel Plates shall incorporate as required welded shoulders, hook-in-shoulders and, Rail BraceAssemblies fitted only on the Guard Rail side and adjacent to a welded shoulder. Drawing MT-2626N Sheet 3 isattached as a Reference to illustrate the Heel Plate Brace detail. Housetop and Switch Rods to be as per Drawing T-2019 DT-8, Chairs to be as per Drawing T-2014 DT-6 and to be leftassembled to housetop for shipment

Product Code: 55979

Agency Information

Issuing Agency: New York City Transit Authority (MTA New York City Transit)

State: New York

Agency Type: State and Local

Contact: Salvatore Cordaro 2 Broadway, New York, New York, 10004

Phone: 646-252-6213




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing