Government Contract | Kentucky
STEEL LADDER REPLACEMENT US 51 OVER OHIO RIVER NEAR CAIRO

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information


Bid Alert No: 00000458160

Bid Title: STEEL LADDER REPLACEMENT US 51 OVER OHIO RIVER NEAR CAIRO

Agency Bid No. Title: 162981

Received Date: 01/12/2016

Close Date: 01/29/2016

Purchase Type: Term: 05/13/2016

Delivery Point: Ballard County, Kentucky

Delivery Date: Not Stated

Special Notices: Bidder Preregistration, Bid Bond Required: 5%

Specifications

Specifications include, but are not limited to:Perform all work in accordance with the KentuckyTransportation Cabinet, Department of Highways 2012 Standard Specifications for Roadand Bridge Construction and applicable Supplemental Specifications, the StandardDrawings (Current Editions), this Note, and the attached detailed drawings forReplacement Ladders. Section references are to the Standard Specifications. This workconsists of the following: (1) Furnish all labor, materials, tools, and equipment for LadderReplacement; (2) Maintain and control traffic; and (3) Any other work specified as partof this contract;II. MATERIALS.A. Structural SteelASTM Material, A709 Grade 50 Structural Steel Plates and Shapes.Minimum structural steel strength, Fy = 50,000 psi.B. High Strength BoltsAll bolted connection shall be 3/4Diameter TYPE 1 (hot dipped galvanized)ASTM A325 strength bolts size as noted, nuts and washers. Diameter of theholes shall be 13/16. Furnish Type 1 bolts as described in AASHTO M164and ASTM A325.C. Safety SystemMiller Vi-Go Continuous Ladder Climbing Safety System, with automaticPass-Through; or equivalent.D. PaintSee section 607 of Standard Specification.III. CONSTRUCTION.A. Ladder Replacement. Complete Ladder Replacement as specified in thisspecial note, and shown in available existing PDF plan sheets, located inproject related information on Construction Procurements website.B. High Strength Bolts. Install all high strength bolted field connections using direct tension indicators (DTIs) in accordance with the StandardSpecifications and ASTM F959. Install DTIs under the bolt head with thebumps facing the underside of the bolt head. Place a hardened washer underthe nut tension connection from the nut side.

Bid Related Documents

Download Document

Product Codes: 95935, 95990

Agency Information


Issuing Agency: Commonwealth of Kentucky - Transportation Cabinet

State: Kentucky

Agency Type: State and Local

Contact: Construction Procurement 702 Capital Ave, Room 383, Frankfort, Kentucky, 40601

Phone: 502-564-3500

Fax: 502-564-8961

Email: kytc.projectquestions@ky.gov

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW