Government Contract | Ohio
Snow Plows

Bid Information

Bid Alert No: 00000452087

Bid Title: Snow Plows

Agency Bid No. Title: 802-16

Received Date: 01/05/2016

Close Date: 01/19/2016

Purchase Type: Not Stated

Delivery Point: Various Locations, Ohio

Delivery Date: Not Stated

Special Notices: Bidder Preregistration, Bid Bond Required: , Minority Business Set-Aside, Women-Owned Business Set-Aside


Specifications include, but are not limited to:Three (3) different front plows will be bid separately on the pricing page. Item A will be an 11 front plow; Item B will be a 12 front plow, Item C will be a 14 front plow. 2A. Acceptable front plow make and models are: Gledhill 11HSBPCL, Gledhill 12 HSBPCL, Gledhill 14HSBPCL, Henke PCL11SMS11, Henke PCL12SMS11, Henke PCL14SMS11, Valk RV1142, Valk RV1242, Valk RV1442 or approved equal. B.Moldboard1B. Moldboard lengths: Item A: 3,353 mm (11'), height 1,066 mm (42"); Item B: 3,657 mm (12'); Item C: 4,267 mm (14') 2B. Moldboard height 1,066 mm (42") 3B. The shape of the moldboard curve will be specified at order based on one of the three ODOT drawing listed in Table A at the end of the specifications. Moldboard shape options X, C, and J must be provided to ODOT. The shape will be specified at time of order by the Ohio Department of Transportation. 4B. Cutting edge to be 19.05 mm x 203.20 mm (3/4" x 8") FSE 5B. Both the moldboard and cutting edge backer shall be punched to receive 3 ft. and 4 ft. blade sections, punched in accordance with O.D.O.T. drawings for cutting edges 6B. A rubber flap of 12.7 mm (2) thickness is required to be mounted full length and 254 mm (10") wide, by using a retaining bar and bolts 7B. A 114mm (4.5) x 25mm (1) inside diameter metal pipe will be mounted on the inner side of the out rib of the plow moldboard on both the left and right sides. This pipe will be as close to the front corners of the plow as possible and will be used to mount a marker pylon. A hole will be drilled to allow for the pylon to be secured to the plow. Two (2) pylon markers will be provided with the plow. 8B. Items A, B and C have standard drawings for plow ribs. Please see Table 2 at the end of the specifications for details on the plow rib configuration. C. Trip Edge Mechanism 1C. The tripping mechanism shall hold the cutting edge rigid for plowing but will allow the cutting edge to trip automatically upon contact with any solid object and return the cutting edge automatically to the original plowing position when released 2C. The trip mechanism shall be of the one (1) piece blade design

Bid Related Documents

Download Document

Product Code: 76561

Agency Information

Issuing Agency: State of Ohio, Department of Transportation (ODOT)

State: Ohio

Agency Type: State and Local

Contact: 1980 W. Broad Street, Columbus, Ohio, 43223



FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing