Government Contract | Missouri
SNOW PLOW PARTS

Bid Information


Bid Alert No: 00000418870

Bid Title: SNOW PLOW PARTS

Agency Bid No. Title: 079-2016RFQ

Received Date: 11/16/2015

Close Date: 11/24/2015

Purchase Type: Not Stated

Delivery Point: Springfield, Missouri

Delivery Date: Not Stated

Special Notices: Bidder Preregistration

Specifications

No additional specifications were given.Heavy Duty Curb Guard (Reference: Winter Equipment HC-6-3-12GR or equal) 3.1.1Heavy Duty Curb Guard 6 inches right side 3.1.2High Impact ASTM Grade A-36 hot roll bar 1 1/8 in thickness 3.1.3High Impact, carbon steel bar running the full length of the front carbide cutting edge. Bar shall be welded to the top front surface of guard with a continuous fillet weld. 3.1.4Drilled 11/16 diameter, then counter sunk and square punched to accept 5/8 plow bolts for flush mounting to blades. 3.1.5 Bright Safety Orange chip and corrosion resistant 3.1.6 Carbide cutting edge matrix shall be 7/8 minimum in height for the full length of the 1 1/8 thick steel base. Carbide matrix profile must be parallel and flush (plus/minus 1/32) to blade side of the guard. Carbide matrix must be fused to the front impact bar. 3.1.7 Carbide wear edge must demonstrate vertical stress relief checks. One relief check minimum per inch of longitudinal carbide matrix. No longitudinal cracks at fusion zone of carbide weld to base steel. Weld repair not allowed in this area. 3.1.8 Cutting edge weld is to have a carbide weld bead along front edge so guard conforms to blade wearing angle. 3.2 Steel Blade (Reference: Black Cat Blade SB20105 or equal) 3.2.1 5/8 inch x 6 inch x 10 feet 1 gauge 3.3 Carbide Insert Blade (Reference: Winter Equipment CB3032022 or equal) 3.3.1 Carbide insert blade 3/4 inch x 6 inch x 3 feet, 2 gauge 3.3.2 The tungsten carbide insert shall be trapezoidal in design. 3.3.3 Tungsten carbide (89% maximum) insert shall be of a grade containing 11% maximum cobalt. 3.3.4 Insert hardness shall be 88.8 Ra scale maximum with a minimum transverse rupture strength of 351,000 psi.

Bid Related Documents

Download Document

Product Codes: 76006, 76561

Agency Information


Issuing Agency: City of Springfield

State: Missouri

Agency Type: State and Local

Contact: Todd Cox, Division of Purchases Division of Purchases, 218 E. Central, Springfield, Missouri, 65802

Phone: 417-864-1708

Fax: 417-864-1927

Email: tcox@springfieldmo.gov

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW