Government Contract | Arkansas
SMALL LOWERED-FLOOR PARATRANSIT VAN

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information


Bid Alert No: 00000409158

Bid Title: SMALL LOWERED-FLOOR PARATRANSIT VAN

Agency Bid No. Title: PT 16-01

Received Date: 11/03/2015

Close Date: 11/18/2015

Purchase Type: Not Stated

Delivery Point: Arkansas

Delivery Date: Not Stated

Special Notices: Bid Bond Required: $1000, Warranty Required

Specifications

Specifications include, but are not limited to:1. Air conditioning: Factory installed front and rear with separate controls for each.2. Alignment: Shall have a complete 4-wheel alignment after the conversion has been completed by anOEM certified service center with certificate of completion.3. Battery: Maintenance free battery with a minimum rating of 550 cold cranking amps at 0 F.4. Body: Shall be reinforced at all joints and corners to support GVWR. Shall withstand road shockunder normal conditions and be fully undercoated with a premium automotive flame retardantundercoating.5. Brakes: Power front and rear disc with four-wheel anti-lock.6. Conversion Dimensions: Shall have the following maximum dimensions: height 74; floor toceiling center 57; ramp angle 12.5. And have the following minimum dimensions: ramp doorheight 56; ramp door opening width 31; wheelchair ramp length 52; wheelchair ramp useablewidth 30; ground clearance (at GVWR load) 5.7. Cooling System: Heavy duty with a heavy duty temperature controlled fan, and factory installedcoolant recovery system.8. Defroster: Rear window.9. Engine: Shall be a V-6 with a minimum 3.6-liter displacement.10. Foot Rest: Shall have a folding foot rest for the rear passenger bench seat.11. Floor Covering: Flooring shall be covered by Altro floor covering or approved equal.12. Flooring: Shall be a vapor-insulated barrier of 3/8 marine grade plywood applied over the metal floor.13. Heater: Integral fresh air heater and defroster with front and rear controls.14. Keys: Two (2) keys minimum per vehicle.15. License plate brackets: Front and rear.16. Locks, Door: Power door locks and keyless entry key fobs.17. Lowered Floor: OEM floor shall be lowered from the toe pan to the area immediately in front of therear axle, through the threshold of each sliding door, while the door itself shall be extended to seal,using no less than 16 gauge stainless steel or aluminized steel metal joined to the body frameproving a leak proof floor. A flame-retardant insulation material meeting OEM standards shall beused to provide sound absorption and a thermal barrier.

Bid Related Documents

Download Document

Product Code: 07192

Agency Information


Issuing Agency: State of Arkansas Department of Highway and Transportation

State: Arkansas

Agency Type: State and Local

Contact: Don McMillen AHTD Equipment and Procurement Division, 11302 W. Baseline Road, Little Rock, Arkansas, 72203

Phone: 501-569-2471

Fax: 501-569-2476

Email: donny.mcmillen@arkansashighways.com

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW