Government Contract | California
SHADE STRUCTURE

Bid Information


Bid Alert No: 00000566894

Bid Title: SHADE STRUCTURE

Agency Bid No. Title: RFB-IS-16201584

Received Date: 05/09/2016

Close Date: 05/25/2016

Purchase Type: Not Stated

Delivery Point: Parks & Recreation - South Region Warehouse, 12910 Athens Way, Los Angeles, California, 90061

Delivery Date: Not Stated

Special Notices: Site-Walk Mandatory 05/18/2016 10:00 AM, Bidder Preregistration, Warranty Required

Specifications

Specifications include, but are not limited to:1. Work will consist of the Installation of new shade structure covering the existing exercise equipment. Digging holes for footings placing steel supporting posts in concrete. Provide a high density polyethylene with ultra violet additives with protect webbbing swen in to all areas where steel cable enters the top.Material to be installed as specified below:2. STEEL:a. All carbon structual steel shall be ASTM A-36, except steel pipe columns, which nshall be ASTM A-53, grade B, unless otherwise noted.b. All welds are performed using E70XX electrodes or gas metal arc welding using ER70S3 wire.c. All fillet welds shall be a minimum of three-sixteenths (3/16) inch unless otherwise noted.3. TENSIONING CABLE & HARDWARE:a. shall conform to FED. Spec. RR-W-410b. Steel cable is determined based on calculated engineering load. For heavy loads, 3/8" (minimal) galvinized 7x19 cable can be used.c. Cable connectors and fabric hardware shall be stainless steel or galvinized.Specifications include, but are not limited to:1. Work will consist of the Installation of new shade structure covering the existing exercise equipment. Digging holes for footings placing steel supporting posts in concrete. Provide a high density polyethylene with ultra violet additives with protect webbbing swen in to all areas where steel cable enters the top.Material to be installed as specified below:2. STEEL:a. All carbon structual steel shall be ASTM A-36, except steel pipe columns, which nshall be ASTM A-53, grade B, unless otherwise noted.b. All welds are performed using E70XX electrodes or gas metal arc welding using ER70S3 wire.c. All fillet welds shall be a minimum of three-sixteenths (3/16) inch unless otherwise noted.3. TENSIONING CABLE & HARDWARE:a. shall conform to FED. Spec. RR-W-410b. Steel cable is determined based on calculated engineering load. For heavy loads, 3/8" (minimal) galvinized 7x19 cable can be used.c. Cable connectors and fabric hardware shall be stainless steel or galvinized.

Bid Related Documents

Download Document

Bid Related Attachments

Download Attachment

Product Codes: 15585, 90925

Agency Information


Issuing Agency: County of Los Angeles

State: California

Agency Type: State and Local

Contact: Peter Genov, Internal Services Department ISD Central Purchasing, 1100 N. Eastern Ave. Room 103, Los Angeles, California, 90063

Phone: 323-267-2297

Email: pgenov@isd.lacounty.gov

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW