Government Contract | Idaho

Bid Information

Bid Alert No: 00000407898


Agency Bid No. Title: RFQ16000192

Received Date: 11/02/2015

Close Date: 11/16/2015

Purchase Type: Spot

Delivery Point: 3311 West State Street, Boise, Idaho, 83707

Delivery Date: Not Stated


Specifications include, but are not limited to:Contractor must have one (1) technician that is experienced in the service and installation of truck mounted service bodys and to oversee and assist in the installation of the service bodys and all related components interfacing with the truck chassis electrical and switch systems. Assembly must be performed in a manner to promote ease of maintenance of the service body and accessories.Welding All joints and seams must be closed by full seam welding.Electrical All electrical cabling must be sized to handle the loads of all electrical components. All cabling must be color coded, uninterrupted, and complete with no splices. All electrical cable terminal ends must be crimped, soldered to the cables, sealed with polyolefin heat shrink tubing or weather proof connectors and protected with dielectric grease. Scotch-Loc and/or crimp butt connectors are NOT acceptable for any electrical connection. All electrical cabling must be enclosed in a protective loom, conduit, or wrapped harness and firmly secured in place by mechanical fastening system. The edges of all holes through which the electrical cabling must pass, must be protected with a grommet. All electrical cabling to the lamps must be stress relieved with six (6) in. of the lamp.Fasteners All threaded fastener components (bolts, washers, and nuts), must be grade eight (8) composition. Two (2) bolt threads must extend through all nuts when fasteners are applied and properly tightened/torqued. Fasteners (bolts) must have grade identifier marks and a registered manufacturers logo. All bolts, washers, and nuts must be zinc plated.Paint Color Contractor must supply a service body exterior and rear bumper painted with a high quality corrosion resistant finish, Sherwin Williams No. 6355 Yellow or equal, sprayed to a dry thickness of three (3) to four (4) mil. Contractor must supply white interior storage compartments for increased illumination. Rear steel hitch and all bare metal steel surfaces on the service body must be cleaned and painted black with a corrosion resistant finish. Contractor-installed components must not have bare ferrous metal components visible. All visible paint finishes must be smooth, shiny, and free of runs, overspray, weld spatter, and/or other defects.Understructure Prime coated black with a water base acrylic or 2-Part Urethane Primer sprayed to a dried thickness of one point five (1.5) mils. Understructure includes underside of the service body, rear bumper, all frame modification work, and fabricated frame components.

Bid Related Documents

Download Document

Bid Related Attachments

Download Attachment


Download Amendment

Product Codes: 06500, 06510

Agency Information

Issuing Agency: State of Idaho - Department of Transportation

State: Idaho

Agency Type: State and Local

Contact: Support Management, Purchasing Office, 3311 West State Street, Boise, Idaho, 83707



FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing