Government Contract | Texas
Security Fence Upgrade @ Mexia

Bid Information

Bid Alert No: 00000577935

Bid Title: Security Fence Upgrade @ Mexia

Agency Bid No. Title: 09-470402996

Received Date: 05/23/2016

Close Date: 06/15/2016

Purchase Type: Not Stated

Delivery Point:

Delivery Date: Not Stated

Special Notices: Pre-Bid Conference 06/02/2016 02:00 PM


Specifications include, but are not limited to:SCOPE OF WORK:1.01 The work shall include, but not be limited to the following:A. Install new 6 chain link fence with top rail and three-strand barbed wire asshown on plans, install 1 each 6 X 20 cantilever gate with 3 strands ofbarbed wire, and install conduit and ground box as per plans. Install motoroperator and concrete pad, 3 key punch, one standard key punch stand andone double key punch stand as per plans. Install wiring and push to talkhardware for communication from gate to front desk. Electrical power will besupplied by bidding contractor for this project. Install motor operator, electriceye, and all ground exit loops.B. Install one six foot Zinc-5% Aluminum-Mischmetal alloy-coated (GALVINAL)9 gauge chain link fencing and accessories for commercial and industrialuse.C. Post caps: Formed steel, cast malleable iron, or aluminum alloy weathertight closure cap for tubular posts. Provide one cap for each post. Cap tohave provision for barbed wire when necessary. Provide top rail on allfencing with tops to permit passage of top rail.D. Top rail and brace rail ends: Pressed steel per ASTM F626, for connectionof rail and brace to terminal posts.E. Wire ties: 9 gauges [0.148 (3.76 mm)] galvanized steel wire for attachmentof fabric to line posts. Double wrap 13 gauges [0.092 (2.324 mm)] for railsand braces. Hog ring ties of 12-1/2 gauge [0.0985 (2.502 mm)] forattachment of fabric to tension wire.F. Barbed wire: Galvanized-coated steel wire double-strand, 13-3/4 gauge,[0.083 (2.10 mm)] twisted line wire with galvanized steel, 4 point barbsspaced approximately 3 (76.2 mm) on center.G. Barbed wire supporting arms: Pressed steel arms with provisions forattaching 3 rows of barbed wire. Arms shall withstand 250 lb. (113.5 kg)downward pull at outermost end of arm without failure. Provide [45] [3strands, single arm] [and] [6 strands double V arms]. Provide intermediatearms with hole for passage of top rail

Product Code: 98815

Agency Information

Issuing Agency: State of Texas - Department of Transportation

State: Texas

Agency Type: State and Local

Contact: Laura Mullins 200 E. Riverside, Room 1B.1, Austin, Texas, 78704

Phone: 512-416-2458

Fax: 512-416-2941




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing