Government Contract | Alabama
Riverside Exterior Stair Tread and Landing Replacement

Bid Information

Bid Alert No: 00000602331

Bid Title: Riverside Exterior Stair Tread and Landing Replacement

Agency Bid No. Title: T054471

Received Date: 06/16/2016

Close Date: 06/28/2016

Purchase Type: Not Stated

Delivery Point:

Delivery Date: Not Stated


Specifications include, but are not limited to:The scope of work for this project is to remove the pan stairs, install new supports, and install new precast, closed treads and risers. The precast treads shall have inserts to bolt to new tread support angles. Material delivery charges to be included in precast tread manufacturer price. Unloading of material to be executed by contractor. Products to be supplied by the precast tread and riser manufacturer include the following. These element are noted with an asterisk (*) on the attached sketches. 1.All precast tread and rise elements, including all embed hardware.2.Starter treads3.Starter tread nosing support steel4.Tread and riser support boltsItems NOT to be supplied by precast tread manufacturer include: 1.Cast-in-place landings.2.All steel items noted, By Contractor, on the attached sketches.The basis of design for the closed, precast tread and riser units is Stepstone, Inc (Gardena, CA >310-327-7474). See attached precast tread specification for a complete listing of material details. Treads and risers shall be. 1. Integrally colored concrete. Color shall be Stepstone French grey or equal. 2. Each tread shall contain a 2 inch wide warning stripe centered 1 from edge of nosing, running the length of the tread. Warning stripe shall be light colored exposed aggregate concrete. 3. Tread and riser units shall be shaped like Stepstone classic, or approved equal. 4. Tread and risers shall be designed for 100 psf live load. 5. Tread and risers shall be designed to allow a 3/16 gap between successive treads and risers to allow for drainage. 6. The ground level riser for each stringer shall stop at least 3/4 above ground level

Bid Related Documents

Download Document


Download Amendment

Product Codes: 91051, 91065, 91361

Agency Information

Issuing Agency: University of Alabama

State: Alabama

Agency Type: State and Local

Contact: Purchasing Department, Box 870130, Tuscaloosa, Alabama, 35401



FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing