Government Contract | North Carolina
Resurfacing Transit Bus Garage Floor and Related Areas

Bid Information


Bid Alert No: 00000542650

Bid Title: Resurfacing Transit Bus Garage Floor and Related Areas

Agency Bid No. Title: Q16-98

Received Date: 04/13/2016

Close Date: 04/29/2016

Purchase Type: Not Stated

Delivery Point: Chapel Hill, North Carolina

Delivery Date: Not Stated

Special Notices: Pre-Bid Conference Mandatory 04/18/2016 01:00 PM

Specifications

Specifications include, but are not limited to:. Project Description Provide a complete removal and replacement of Chapel Hill Transits concrete floor coating, including all reasonable and necessary labor, supervision, testing, equipment and supplies. The contracted area shall be 6900 Millhouse Rd. Chapel Hill, NC 27516. Contractor is to remove and repair existing concrete floor coating in the following areas under the stated conditions. Any schematics drawings provided by the Town will be for informational purposes only. 1) Mechanics Garage a) The floor will be the Urethane Cement System as specified in Section 3.4.2. b) Existing safety striping must be replaced [per OSHA standards 1910.22(b)] with solid coloring and integrated into the topcoat with the full system as specified. c) Staging Requirements: Only two bays may be down at one time, which includes estimated curing time. d) Per Section 3.7.1, optional pricing shall be provided for preparation and painting to a height of 12ft all vertical surfaces in the Mechanics Garage, excluding the Mechanics Pit. 2) Mechanics Garage Pit a) Metal railings and stairs must be prepped and repainted per the specification in Section 3.7.2. b) The floor will be the Urethane Cement System as specified in Section 3.4.2. c) Concrete posts and vertical walls shall be included in the baseline scope of work to be re-coated. The posts and vertical walls shall be the Epoxy System as specified in Section 3.4.1. d) Staging Requirements: Both of the two pit bays may be down at one time (but no other additional bays, includes estimated curing time). 3) Mechanics Garage Pressure Wash Bay a) The floor will be the Urethane Cement System as specified in Section 3.4.2. b) Existing Safety Striping must be replaced [per OSHA standards 1910.22(b)] with solid coloring and integrated into the topcoat with the full system as specified. 4) Parts Room a) Urethane Cement System as specified in Section 3.4.2. b) Cut and key at all transitions to untreated areas beneath fixed shelving. c) Parts Room includes the managers office, the clerks area, the space between the managers office and the clerks area, the tool room, the conditioned storage room, and the uniform room. d) Existing Safety Striping must be replaced [per OSHA standards 1910.22(b)] with solid coloring and integrated into the topcoat with the full system as specified. e) Staging Requirements: Must maintain access through either rear or front doors at all times. May only coat every other aisle at one time, includes estimated curing time. 5) Electronics Room: Urethane Cement System as specified in Section 3.4.2. 6) Stairwell A. a) Epoxy System as specified in Section 3.4.1. b) Includes painting all railings and trim per the specification in Section 3.7.2Resurfacing Transit Bus Garage Floor Bid: Q16-98, Town of Chapel Hill, NC Monday, April 11, 2016 Page11c) Staging Requirements: Only one of Stairway A or B may be closed off at one time, including estimated curing time. 7) Stairwell B a) Epoxy System as specified in Section 3.4.1. b) Includes painting all railings and trim per the specification in Section 3.7.2 c) Staging Requirements: Only one of Stairways A or B may be closed off at one time, including estimated curing time 8) IT Room: Epoxy System 9) Circuit Breaker Room: Epoxy System 10) First Floor HVAC Room: Epoxy System 11) First Floor Janitorial Closet: Urethane Cement System 12) Second Floor Janitorial Closet: Epoxy System Bidders should use the Testing Results attached as provided in Exhibit A, Chapel Hill Transit Moisture Test Results, as an essential component in ensuring that all specifications are addressed fully in their Bids and that the products used will meet the warranty requirements

Bid Related Documents

Download Document

Bid Related Attachments

Download Attachment

Product Codes: 91430, 91025

Agency Information


Issuing Agency: Town of Chapel Hill

State: North Carolina

Agency Type: State and Local

Contact: Zakia Alam, Purchasing Division Purchasing Office, 405 Martin Luther King Jr. Boulevard, Chapel Hill, North Carolina, 27514

Phone: 919-969-5022

Email: zalam@townofchapelhill.org

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW