Government Contract | Michigan

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information

Bid Alert No: 00000464672


Agency Bid No. Title: Not Stated

Received Date: 01/20/2016

Close Date: 02/01/2016

Purchase Type: Not Stated

Delivery Point:

Delivery Date: Not Stated


Specifications include, but are not limited to:he chassis frame shall be built with two (2) steel channels bolted to five (5) cross members or more, depending on other options of the apparatus. The side rails shall have a 13.38" tall web over the front and mid sections of the chassis, with a continuous smooth taper to 10.75" over the rear axle. Each rail shall have a section modulus of 25.992 cubic inches and a resisting bending moment (rbm) of 3,119,040 in-lb over the critical regions of the frame assembly, with a section modulus of 18.96 cubic inches with an rbm of 2,275,200 in-lb over the rear axle. The frame rails shall be constructed of 120,000 psi yield strength heat-treated 0.38" thick steel with 3.50" wide flanges. FRAME REINFORCEMENT In addition, a full-length mainframe internal "C" liner shall be provided. The liner shall be an internal "C" design that steps to a smaller internal "C" design over the rear axle. It shall be heat-treated steel measuring 12.50" x 3.00" x 0.25" through the front "C" portion of the liner, stepping to 9.38" x 3.00" x 0.25" through the rear "C" portion of the liner. Each liner shall have a section modulus of 13.58 cubic inches, yield strength of 110,000 psi, and rbm of 857,462 in-lb. Total rbm at wheelbase center shall be 4,391,869 in-lb. The frame liner shall be mounted inside of the chassis frame rail and extend the full length of the frame. FRONT NON DRIVE AXLE The front axle shall be of the independent suspension design with a ground rating of 19,500 lb. Upper and lower control arms shall be used on each side of the axle. Upper control arm castings shall be made of 100,000 psi yield strength 8630 steel and the lower control arm casting shall be made of 55,000 psi yield ductile iron. The center cross members and side plates shall be constructed out of 80,000 psi yield strength steel.

Bid Related Documents

Download Document

Product Code: 07230

Agency Information

Issuing Agency: City of Sturgis

State: Michigan

Agency Type: State and Local

Contact: 130 N. Nottawa Street, Sturgis, Michigan, 49091



FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing