Government Contract | Missouri
REPAIR OF BLEACHERS AT CENTRAL ACADEMY

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information


Bid Alert No: 00000554535

Bid Title: REPAIR OF BLEACHERS AT CENTRAL ACADEMY

Agency Bid No. Title: C-16-31

Received Date: 04/26/2016

Close Date: 05/20/2016

Purchase Type: completed by July 29, 2016

Delivery Point:

Delivery Date: Not Stated

Special Notices: Questions Due By 05/13/2016 02:00 PM, Pre-Bid Conference Mandatory 05/10/2016 09:00 AM

Specifications

Specifications include, but are not limited to:The work to be done by the Vendor shall include a full service repair of the Interkalbrand bleachers, consisting of one bank of 6 sections, with 18 rows per section, free standing and floorattached. Vendor shall furnish material and labor for repair and refurbishing telescopic bleachers asspecified herein.A. With an industrial strength cleaner, clean all wheel channels, guide rods and upper horse framearms. Lubricate all moving or friction parts with white lithium grease. All old grease shallbe removed prior to applying new grease.B. Replace all missing or broken wheels, axles, and clip assemblies. Lift the wheel channels offthe floor to allow the wheels to be cleaned with a degreasing solution. Ensure that the solutiondoes not harm the gym floor finish. After the wheels have been degreased, wire brush themclean, then lubricate the wheel axles.1. Scrub wood floors clean behind stored bleachers, especially in the wheel channellocations.C. Tighten all nuts, bolts and hardware. Replace any missing screws, bolts, nuts and hardware.D. Repair or replace all bent, damaged, or worn moving mechanisms that inhibit or hinderoperation of bleachers. Bent members that are not replaced must be structurally modifiedto enhance their strength. Replacement parts must be NEW. Rebuilt parts will berejected.E. Gang all row 1 thru 3 sections together to add stability of section to section connections.Provide (2) square tube, hot rolled purlin steel per row of 1 x 1 x 1/8, one at front and oneat back. Purlin steel shall be 10 lengths at row 1. 8 and 3 lengths at rows two (2) and three(3), respectively. Bolts or bolted plates are unacceptable. All purlin steel shall be paintedto match existing

Bid Related Documents

Download Document

Amendments

Download Amendment

Product Codes: 42004, 91000

Agency Information


Issuing Agency: Kansas City School District

State: Missouri

Agency Type: State and Local

Contact: Larry Weissman, Procurement Procurement Services Department, 1211 McGee Street, Suite 535, Kansas City, Missouri, 64106

Phone: 816-418-7300

Fax: 816-418-7166

Email: lweissma@kcmsd.net

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW