Government Contract | South Carolina
Rain Suits & Coats

Bid Information


Bid Alert No: 00000424878

Bid Title: Rain Suits & Coats

Agency Bid No. Title: 5400010527

Received Date: 12/01/2015

Close Date: 01/06/2016

Purchase Type: 02/02/2016End date: 02/02/2021

Delivery Point:

Delivery Date: Not Stated

Special Notices: Questions Due By 12/08/2015 12:00 PM, Bidder Preregistration

Specifications

Specifications include, but are not limited to:The South Carolina Department of Transportation is soliciting bids from offerors to supply rain coats and two piece rain suits. Rain coats shall conform to ANSI/ISEA 107-2010 TABLE 1. MINIMUM AREAS OF VISIBLE MATERIAL FOR A PERFORMANCE CLASS 3 GARMENT and the specifications below. Rain suits shall have coats that must conform to ANSI/ISEA 107-2010 TABLE 1. MINIMUM AREAS OF VISIBLE MATERIAL FOR A PERFORMANCE CLASS 3 GARMENT and bib overalls that must conform to ANSI/ISEA 107-2010 TABLE 1. MINIMUM AREAS OF VISIBLE MATERIAL FOR A CLASS E GARMENT and the specifications belowSPECIFICATIONS FOR RAIN COATSCDOT Spec. No. 136840.15 07/15/15DESCRIPTION: This specification covers Class 3 high visibility rain coats for use in Highway Work Zones. The rain coat must be constructed of durable material in accordance with this specification to be worn by SCDOT employees during both day and night conditions. The Class 3 rain coat must be manufactured using ANSI/ISEA 107-2010 certified background and retro-reflective component materials meeting all the design requirements.Each rain coat shall conform to ANSI/ISEA 107-2010 TABLE 1. MINIMUM AREAS OF VISIBLE MATERIAL FOR A PERFORMANCE CLASS 3 GARMENT. The manufacturer shall certify that the model rain coat meets all set requirements as stated in ANSI/ISEA 107-2010 as a compliant High-Visibility safety item for Performance Class 3.MATERIALS and CONSTRUCTION:Background Material- Required ANSI/ISEA 107-2010 Class 3 certified:Rain coat shall be constructed from material meeting ANSI/ISEA 107-2010 Class 3 requirements offering the wearer the best possible degree of comfort consistent with the provision of adequate protection. Material shall be fluorescent orange-red in color meeting the ANSI/ISEA 107-2010 for apparel in accordance with Table 2. Color of Background and Combined-Performance Material of the standard.The coat shall be of 49 inch minimum length. Closures on coat and hood attachment shall be made of non-conductive material. Air vents shall be provided under both arms and the back of the coat shall be vented with double back (cape). The coat shall have one large patch pocket on each side with suitable protection flap. Pockets of other than the patch type will be considered acceptable provided the coat is sufficiently reinforced at pocket openings to prevent splitting. A detachable hood with draw string shall be provided with each coat.LOGO MATERIAL AND DESIGN:The SCDOT logo shall be 2-inches high and made from Cuttable 3M 5807 Silver Retro-reflective material.The logo shall be centered on the back upper area of the coat . (See Coat Diagram )

Product Codes: 20074, 20165

Agency Information


Issuing Agency: State of South Carolina - Department of Transportation (SCDOT)

State: South Carolina

Agency Type: State and Local

Contact: Emmett Kirwan 1201 Main Street, Suite 600, Columbia, South Carolina, 29201

Phone: 803-737-0676

Email: kirwanei@scdot.org

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW