Government Contract | Alabama
Purchase of One (1) Walking Floor Trailer

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information


Bid Alert No: 00000411385

Bid Title: Purchase of One (1) Walking Floor Trailer

Agency Bid No. Title: WG16-04

Received Date: 11/05/2015

Close Date: 11/23/2015

Purchase Type: Not Stated

Delivery Point: Baldwin, Alabama

Delivery Date: Not Stated

Special Notices: Bidder Preregistration

Specifications

Specifications include, but are not limited to:APPROXIMATE DIMENSIONS:OVERALL LENGTH: 45-9OVERALL WIDTH: 102OVERALL HEIGHT: 160INSIDE LENGTH: 45INSIDE WIDTH: 93 INSIDE HEIGHT: 104CENTER OF KING PIN TO FRONT: 36LIVE FLOOR:Keith Walking Floor #2301 HYDRAULIC LLY-OPERATED LIVE FLOORDRIVE MECHANISM:2 IN. X 6 IN. CROSS DRIVES CLAMPED TO HYDRAULIC CYLINDER BARRELSSUPPORTED BY SUPPORT RAILS WHICH ARE ATTACHED TO CENTERFRAME.THE TWO CYLINDERS ON EACH CROSS DRIVE MUST BE INDEPENDENTLYREMOVABLE AND INTERCHANGEABLE.MOUNTING: THE HYDRAULIC DRIVE MECHANISMS MUST BE MOUNTED TO THECENTER FRAME WHICH IS ATTACHED TO THE TRAILER SUSPENSIONS SUBFRAME.THE FLOOR MUST HAVE 24 MOVING EXTRUDED FORM 6061-T6 ALUMINUMON 6 IN. CENTERS.LEGS AND TOP OF EACH FLOOR SLAB TO BE .187 MINIMUM THICKNESSWITH TWO .750 WIDE X 500 OVERALL THICK RIDGES WITH SLOTS TOACCOMODATE .750 WIDE POLYETHLYLENE SEALS.EACH CROSS SILL MUST HAVE 14 HIGH DENSITY POLYETHYLENEBEARINGS ATTACHED TO IT.MINIMUM BEARING SURFACE 30.21 SQUARE INCHES.EACH FLOOR EXTRUSION SHALL BE SECURED TO THE DRIVE MECHANISMWITH A MINIMUM OF EIGHT 5/16 IN. X 1 IN. ALLEN TYPE COUNTER SUNKBOLTS, GRADE 8 WITH LOCKING NUT.HYDRAULIC SYSTEM RATING TO BE 30 GPM 3000 PSI.MUST BE EQUIPPED WITH TWO 9 FT. LONG 1 IN. DIAMETER HOSES WITHSCREW TYPE COUPLERS WITH 1 IN. FEMALE FITTING ON THE PRESSURESIDE AND 1 IN. MALE FITTING ON RETURN SIDE.STRUCTURAL REQUIREMENTS:SIDES: 12 GA. STEEL 50,000 PSI (MIN.) YIELD.FRONT: 12 GA. STEEL 50,000 PSI (MIN.) YIELD.TAILGATE: 12 GA. STEEL 50,000 PSI (MIN.) YIELD.CROSS MEMBERS: 4" JR I-BEAM ON 12" CENTERS.TOP RAIL: 6" X 4" X 3/16."BOTTOM RAIL: 10 GA. FORMED HIGH TENSILE STEEL.SIDE POSTS: 5 5/8" X 3 1/4" FORMED 12 GA. ON24" CENTERS.LONG MEMBERS: 3/16" FORMED HIGH TENSILE STEEL.SUSPENSION SUB FRAME: 3/16" FORMED HIGHTENSILE STEEL CHANNEL.TOP CROSSTIE: (1) CENTER, (1) REAR, ROLLER STYLE.FIFTH WHEEL: 3/8" HIGH TENSILE.BUMPER: HEAVY-DUTY PUSH BUMPER WITH CENTER TOW PIN.PAINT: STANDARD FACTORY COLOR WHITE OR GRAY EITHER ISACCEPTBABLE

Bid Related Documents

Download Document

Product Codes: 07360, 07324

Agency Information


Issuing Agency: County of Baldwin

State: Alabama

Agency Type: State and Local

Contact: Baldwin County Purchasing Office, 312 Courthouse Square, Suite 15, Bay Minette, Alabama, 36507

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW