Government Contract | Georgia
Purchase of Lockers, Shelving and Teacher Mailboxes.

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information

Bid Alert No: 00000459775

Bid Title: Purchase of Lockers, Shelving and Teacher Mailboxes.

Agency Bid No. Title: BID-B-1628SM

Received Date: 01/14/2016

Close Date: 01/27/2016

Purchase Type: 9 month contract

Delivery Point:

Delivery Date: Not Stated

Special Notices: Questions Due By 01/21/2016


Specifications include, but are not limited to:STUDENT BOOK LOCKERS - 12 X 15 X 12 - 5 High W/Sloped Top, Legs, Closed Front And Base, Built In Combination Lock, Masterkeyed. Lockers To Be Anchored To Walls Every Third Locker And Correct Fittings To Assure Neat, Rigid Installation. MATERIAL: Mild Annealed, Cold Rolled Steel Free From Surface Imperfections. Bolts To Be Cadmium Plated Or Subjected To Other Rust Proofing. BODY: 24 Gauge Steel, Flanged To Give Double Thickness Of Metal At Back Vertical Corners. DOOR FRAME: 16 Gauge Formed Steel Channels. Vertical Members Shall Have An Additional Flange To Form Continuous Door Strike. Corners Shall Be Lapped And Welded Into A Rigid Assembly. Bottom Cross Member Shall Have Tang At Each End Which Fits Through Slot In Rear Flange Of Upright Frame Member To Prevent Twisting Out Of Alignment. Top And Bottom Cross Member Shall Provide Support For Front Edge Of Locker Top And Bottom. DOORS: One Piece 16 Gauge Steel With Both Vertical Edges Formed Into Channel Shaped Formation; Top And Bottom Shall Be Flanged At 90 Degree Angle. Louvers Shall Be Provided On Each Door. DOOR JAMB: Lockers To Have Door Jambs Welded To Side Of Door Frames To Engage Lock. HINGES: Hinges Shall Not Be Less Than 2 High, .050 Inch Steel, Five Knuckle, Full Loop Forming Double Thickness On Each Leaf. Hinges To Be Set In Slot And Frame And Projection Welded To Frame, Securely Attached To Door. Hinge Pin To Be Spun Over At Ends To Prevent Removal. Lockers To Have Two (2) Hinges On Right Hand Side Of Door. NUMBER PLATES: Aluminum Number Plates With Characters At Least 1/2 High. All Lockers Shall Have Number Plates Attached Near Top Of The Door. Number Sequences Will Appear On The Purchase Order. Steel Parts Shall Be Thoroughly Cleaned, Given A Bonding And Rust Inhibitive Phosphate Treatment And Then electrostatically Sprayed With A Heavy Coat Of High Quality Enamel. Enamel Shall Be Baked At 300 Deg. And Must Withstand A Rigid Hammer Test Without Chipping Or Flaking

Bid Related Documents

Download Document

Bid Related Attachments

Download Attachment

Product Codes: 42553, 42580, 45057

Agency Information

Issuing Agency: Gwinnett County School District

State: Georgia

Agency Type: State and Local

Contact: Kim Murphy, Purchasing Department Purchasing Department, 437 Old Peachtree Road, NW, Suwanee, Georgia, 30024

Phone: 678-301-6292




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing