Government Contract | Texas
PROFESSIONAL SERVICES FOR THE DESIGN-BUILD OF THE PROPOSED DENTON COMPRESSED NATURAL GAS (CNG)

Bid Information


Bid Alert No: 00000447432

Bid Title: PROFESSIONAL SERVICES FOR THE DESIGN-BUILD OF THE PROPOSED DENTON COMPRESSED NATURAL GAS (CNG)

Agency Bid No. Title: RFQ 6016

Received Date: 12/30/2015

Close Date: 02/16/2016

Purchase Type: Not Stated

Delivery Point: Denton, Texas

Delivery Date: Not Stated

Special Notices: Questions Due By 01/14/2016 11:00 AM

Specifications

Specifications include, but are not limited to: The minimum quality of certain selected CNG Fueling Station components to beincluded in this design-build project include but not be limited to the following:1. Natural Gas Compressors Two compressor units to be ANGI Compressor - ANGI NG300E JGQ2-3-stg 999 scfm Flow Capacity @ 265 psi inlet 4500 psig Discharge 250 Bhp, 480VAC, 1800 rpm Motor ANGI Control System with Allen Bradley Remote I/O Including Weather-proof Enclosures Communications Panel Motor Starter Package: Duplex Soft starter NEMA 3R Enclosure 65 KAIC Short Circuit Rating Equipment Control Power & ESD Control System output compressor per hour: 888 DGE (1 DGE (diesel gallon equivalent) = 135 SCF(standard cubic feet)) Required Utilities are 480 Volt / 3 Phase from electric utility and 350 psig inlet pressure fromnatural gas utility2. One Inlet Gas Dryer Manually Initiated Regeneration Process Stock Model - Single Tower Includes Electrical Dew Point Monitor Dryer is rated for 2004 scfm at 270 psig inlet pressure Manually initiated, automatic on-skid regeneration, inlet and discharge filters and by-passvalves. 1 Pre-filter and 1 After-filter mounted3. One set of ASME storage vessel assembly, a vertical - 3 Vessel Pack Capable of storing 64,766 scf Natural Gas at 5500 psig. Each assembly includes inlet & relief valve isolation ball valves, ASME pressure relief valve foreach vessel and I-beam mounting of vessel in a 1 vessel wide, 3 vessels high configuration.4. Two Fast Fill Dispensers w/ Internal Card Reader on separate service islands Dual Hose, High Flow CT1000 or 5000 Nozzles (1) LCD Display with Backlight per Hose Stainless Steel Enclosure & Pit Frame Approved for Weights and Measures

Product Codes: 92525, 92518

Agency Information


Issuing Agency: City of Denton

State: Texas

Agency Type: State and Local

Contact: Elton D. Brock Purchasing Department, 901-B Texas Street, Denton, Texas, 76209

Phone: 940-349-7100

Fax: 940-349-7302

Email: elton.brock@cityofdenton.com

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW