Government Contract | Kansas
one (1) Spindle Motor with Automatic Tool change, variable frequency drive, and related accessories

Bid Information


Bid Alert No: 00000401146

Bid Title: one (1) Spindle Motor with Automatic Tool change, variable frequency drive, and related accessories

Agency Bid No. Title: B0001604

Received Date: 10/23/2015

Close Date: 11/04/2015

Purchase Type: Not Stated

Delivery Point:

Delivery Date: Not Stated

Specifications

Specifications include, but are not limited to:This bid is for quantity one (1) Spindle Motor with Automatic Tool change, variable frequency drive, and related accessories. All items are Quantity 1 unless otherwise stated. This bid is for one (1) spindle motor and drive system. This system is to be mounted as an end effector to a large robot. WATC will handle the robot mount interface. Spindle motor shall have at a minimum the following specifications: Spindle motor shall have an 11HP rating or higher Spindle motor shall run from 12,000 to 24,000 RPM Spindle motor shall have a manual push button for tool release and setup. Spindle motor shall be cooled by electric 24v fan Spindle motor shall have air pressurization of the front bearings Spindle motor shall allow tool clamping of an HSK-F-63 taper Spindle motor shall have automatic tool change capabilities controlled by double acting pneumatic actuators Spindle motor shall have necessary sensor to manage automatic tool change capabilities Spindle motor should be able to maintain constant power from 12,000 - 24,000 RPM Spindle motor shall have dual angular ceramic contact bearing on the front and rear Spindle motor shall have IP55 protection rating Spindle motor shall be CE approved The variable frequency drive system for the spindle motor shall the minimum specifications: Variable Frequency Drive system shall be 100% compatible with spindle motor in same bid document. Variable Frequency Drive system shall be rated for the horsepower rating of the spindle motor. Variable Frequency Drive shall operate on 380-480V, 3 Phase power Variable Frequency Drive shall have a standard LCD Display and a minimum 5 meter cable for remote monitoring

Bid Related Documents

Download Document

Product Codes: 54500, 78555

Agency Information


Issuing Agency: Wichita Area Technical College

State: Kansas

Agency Type: State and Local

Contact: Mindy Dixon Wichita Area Technical College Purchasing Department, 4004 N Webb Road, Wichita, Kansas, 67226

Phone: 316-677-1400

Email: purchasing@watc.edu

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW