Government Contract | California
ONE (1) LIVE FLOOR REFUSE TRANSFER TRAILER

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information


Bid Alert No: 00000448509

Bid Title: ONE (1) LIVE FLOOR REFUSE TRANSFER TRAILER

Agency Bid No. Title: 4783

Received Date: 12/24/2015

Close Date: 01/15/2016

Purchase Type: Not Stated

Delivery Point: Fleet Maintenance, Building #1, 20055 Viking Way, Redding, California, 96003

Delivery Date: Not Stated

Special Notices: Questions Due By 01/06/2016 05:00 PM, Warranty Required

Specifications

Specifications include, but are not limited to:TRAILERDIMENSIONS:LENGTH: The overall length shall be 45'. The overall width shall be102" with a minimum 97" inside dimension.INSIDE HEIGHT: The inside height shall be 103 at the front and111 at the rear with floor sloping to the rear.OVERALL HEIGHT: An overall loaded height of 13 6" with alevel top when connected to the truck tractor.UNLOADED HEIGHT: The tractor fifth wheel shall be 50" abovethe road with the trailer coupled but unloaded.KING PIN: The fifth wheel king pin shall be 46" from the front of thetrailer.CAPACITY: The volume capacity of the trailer shall be 122 cubicyards.INTERIOR:The interior of the trailer shall be smooth. The design of the trailer shallbe such that outer surfaces and rear trailer lights, where refuse mayaccumulate during loading and unloading operations will remainclear/clean.SIDE WALLS:MATERIAL: The side wall material shall be an aluminum extrusion,measuring 14" wide, 2.5" thick and shall be a hollow core panel with aninside face thickness of 0.150 and an outside face of 0.090, made out of6061-T6 extruded aluminum, and continuously welded to the lower railand the top rail.PANEL WELDMENT: Each extruded panel shall be weldedvertically to the next panel by an automated welder to ensure the weldpenetration is consistent from one panel to the next. All panels arewelded inside and outside so to prevent leakage from inside of thetrailer. There are to be no bolts, rivets, or huck bolts attaching thepanels to each other or to the top rail, bottom rail, or the front and rearposts of the trailer. The extruded panels sit on the outside of the lowerrail, so there is no lip on which trash or other materials can sit oraccumulate.

Product Code: 07324

Agency Information


Issuing Agency: City of Redding

State: California

Agency Type: State and Local

Contact: Mari Szynal, Purchasing Division Purchasing Division, 777 Cypress Avenue, Redding, California, 96001

Phone: 530-225-4138

Fax: 530-225-4434

Email: mszynal@ci.redding.ca.us

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW