Government Contract | South Carolina
one (1) each, new, unused, 2016 model, tandem cab & chassis with CNG engine for a tilt frame & reeving assembly

Find Open Contracts in the Architecture and Engineering Industry

Find Contracts Now

Bid Information

Bid Alert No: 00000410604

Bid Title: one (1) each, new, unused, 2016 model, tandem cab & chassis with CNG engine for a tilt frame & reeving assembly

Agency Bid No. Title: 2316/11-19-15

Received Date: 11/04/2015

Close Date: 11/19/2015

Purchase Type: Not Stated

Delivery Point: Equipment Maintenance Shop,, 725 Justice Boulevard, York, South Carolina, 29745

Delivery Date: Not Stated

Special Notices: Warranty Required, Bidder Preregistration


Specifications include, but are not limited to:5.0 SPECIFICATIONS5.1 WEIGHT: The manufacturer's certified gross vehicle weight (GVW) rating shall be a minimum of 59,500 pounds.5.2 CAB: The truck shall be furnished with air cab mounts, front fenders, radiator grill, tilting hood, running boards and a coupe type enclosed cab. All glass used in windows shall be tinted shatterproof safety glass. There shall be separate heavy-duty vinyl bucket type seats for the driver and passenger that are equipped with seat belts. The driver's seat shall be air control.5.3 DIMENSIONS: The wheelbase shall be so that it will have a clear span of 186-inches from the rear of the cab to the center of the tandem.5.4 ENGINE: The engine shall be a Cummins ISL G 320 in-line 6-cylinder compressed natural gas(CNG) with not less than 330 horsepower at 2200 RPM; 1,000 Ft. Lbs. gross torque at 1450 RPM.5.5 MUFFLER: There shall be a horizontal frame-mounted muffler beneath the frame of the truck.5.6 TRANSMISSION: The truck transmission shall be an Allison 3000RDS with synthetic oil added at the factory. There also shall be a low oil level sensor and side-by-side PTO option. The transmission must be accompanied by a certified Allison iSCANN.5.7 REAR AXLE: Both rear axles shall be 45,000 lbs., with magnetic traps, RT460 suspension with bronze bushings, and a gear ratio to obtain a maximum road speed of 70 mph.5.8 FRONT AXLE: Both front axles shall be 16,000 lbs., (oil lubricated wheel bearings) with 8,000 lb. springs on each side, complete with axle back setting.5.9 FRAME: The all bolted frame shall be 110,000-psi steel with 29.4-section modulus. The frame rear overhang shall be a minimum of 68-inches.5.10 WHEELS: The front wheels shall be 22.5" x 8" 10 hole disc type and the rear wheels shall be 22.5" x 8" 10 hole disc type. All wheels shall have a minimum offset of 1-3/4 from bead to outside of wheel face.5.11 TIRES: The front tires shall be 1200Rx22.5 16ply. The rear tires shall be 1100Rx22.5, 14ply highway tread, tubeless type.5.12 BRAKES: The brakes shall be a full air type with a 12 cfm air compressor, 30/30 chambers, automatic slack adjusters and a Bendix AD9 heated air dryer system, or equal.5.13 FUEL TANKS: Dual, rail-mounted tanks to hold a combined minimum 80 diesel gallon equivalent (dge) with fill spouts located on both sides of the truck5.14 ELECTRICAL: Two each 93 amp, 625 CCA minimum batteries and a minimum 75 amp. alternator shall be provided.5.15 COLOR: Exterior: White

Bid Related Documents

Download Document

Product Code: 07208

Agency Information

Note to Vendors To access the agency specs go to: WWW.GOVBIDS.COM/SCRIPTS/SC1/PUBLIC/HOME1.ASP. Registration is mandatory and free for BidNet clients. If you are not already registered, login to WWW.BIDNET.COM and select Add eProcurement Systems. For assistance, call BidNets Bid Alert Service Support Center at 1-800-677-1997.

Issuing Agency: County of York/IPT

State: South Carolina

Agency Type: State and Local

Contact: Teria G. Sheffield 6 South Congress Street, P.O. Box 180, York, South Carolina, 29745

Phone: 803-684-8520




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing