Government Contract | Minnesota
On-Street Bicycle Corral Systems

Bid Information

Bid Alert No: 00000513649

Bid Title: On-Street Bicycle Corral Systems

Agency Bid No. Title: EC031116

Received Date: 03/15/2016

Close Date: 03/30/2016

Purchase Type: Not Stated

Delivery Point:

Delivery Date: Not Stated


Specifications include, but are not limited to:On-streetBikeCorral:Furnish and install/remove style 10 single bike corral consisting of five hoop racks mounted on rails capable of parking up to 10 bikes or double bike corral consisting of eleven hoop racks mounted on rails capable of parking up to 22 bikes and allowing users to lock their frame and wheels with a u-style bike lock. Racks mounted on the rails can be oriented from 60 to 90 degree angle with a minimum of 3 feet separation between the individual hoop racks. Each of five or eleven racks shall be one continuous bend, not two separate bends. The outside diameter of the rack shall be 24 and 35 high. MaterialsHoop Racks: 1.5 schedule 40 pipe (1.9 OD) Wheel Stops: Recycled plastic (6 feet in length) Mounti n g s y s t e m Hoop racks are mounted to galvanized rails which should be anchored to the ground. The rack shall have two mounting feet per unit. Each foot shall be .25 thick steel plate, 2.5 wide by 6 long. Two slots in each plate shall be 7/16 in width and 1 in length and centered 1 in on the plates. There will be a 1.25 diameter hole in the center of the plate. The full circumference of the rack body shall be welded to the feet plates. The feet shall be 22.1 apart, center line measurements. The feet will correspond to a rail system into which they will be secured. The rails will be a C3x4.1 channel profile. The width will be 3, the height will be 1.41 and the web thickness will be .170. The galvanized rail will weigh 4.39 lbs. per foot. The racks will be secured to the rail with four 3/8 x .75 carriage bolts. Two of the four carriage bolts measurements along the length of the rail. The rails will be hot dipped galvanized after fabrication. Overall, the bike rack shall be 24 wide and 35 high. The bike racks may either be mounted to the rails at either 60 or 90 degree angles. (60 degrees preferred) F i n i s h An after fabrication hot dipped galvanized finish is the standard option. 250 TGIC powder coat colors, thermoplastic coating, PVC dip, and stainless steel finishes are also available as alternate options. For Galvanized Racks: The racks shall be hot dipped galvanized after fabrication

Bid Related Documents

Download Document


Download Amendment

Product Code: 65010

Agency Information

Issuing Agency: City of Minneapolis

State: Minnesota

Agency Type: State and Local

Contact: Emily Connolly Purchasing Department, 330 Second Avenue South, Suite 552, Minneapolis, Minnesota, 55401

Phone: 612-673-2197




FREE Market Analysis

Get a FREE 90-Day Market Analysis and see the bids you’ve been missing