Government Contract | California
OCTA COACH OPERATOR, OPERATIONS INSTRUCTOR AND FIELD SUPERVISOR UNIFORMS

Bid Information


Bid Alert No: 00000410323

Bid Title: OCTA COACH OPERATOR, OPERATIONS INSTRUCTOR AND FIELD SUPERVISOR UNIFORMS

Agency Bid No. Title: 5-3756

Received Date: 11/05/2015

Close Date: 12/09/2015

Purchase Type: Not Stated

Delivery Point:

Delivery Date: Not Stated

Special Notices: Pre-Bid Conference Optional 11/12/2015

Specifications

Specifications include, but are not limited to:Male Short Sleeve ShirtColor:Light BlueFabric:Permanent press finish.Pattern: Full body pattern, with sufficient longer tails for larger sizes to make sure that all shirts stay tucked in.Collar:Dress shirt design. The stand shall fasten with one button so that there will be a tie space of -inch when the collar is buttoned. Collar stays shall be good quality and sewn inside collar leaf.Sleeves: Sleeves are to be secured to the body of the shirt by a narrow stitch with a safety stitch to strengthen the seam. This stitch to be used on the side closing seams as well.Back:The back yoke shall be made of double thickness material.Pockets: There shall be two front pockets to be single stitched on the edge with each upper corner securely held with a -inch triangle stitch made apex down.Buttons: All buttons to be made from thermosetting pearlized polyester material heat-resistant and crush proof. Buttons to be securely attached by double-stitch (sufficiently sewed to prevent becoming unraveled) to the button stand corresponding to the buttonholes on the facing.Size Scale: Standard Size Availability must be 14 through 20 in -inch graduations.Example Style:Conqueror style # 0905XSupplier may propose a brand and style number. Include all pertinent information about the proposed garment.SUPPLIERS RESPONSE:Male Long Sleeve ShirtThe details are to be identical to the male short sleeve shirt design with the following exceptions:Sleeves: To be straight and whole. The sleeves are to be secured to the body of the shirt by a narrow stitch with a safety stitch to strengthen the seam. The same stitch will be used on the side closing seams as well.Cuff Buttons: In addition to the normal cuff button, a button and corresponding buttonhole are to be on the cuff vent.Size Scale: Standard Size Availability should be 14 through 17 inch - inch graduations. Sleeve Lengths should be 31 through 36 in1-inch graduations.Example Style:Conqueror style # 0899Supplier may propose a brand and styl

Bid Related Documents

Download Document

Product Codes: 20074, 20086, 20088, 20085, 20087

Agency Information


Issuing Agency: Orange County Transportation Authority (OCTA)

State: California

Agency Type: State and Local

Contact: Susan Taylor, Contracts Administration and Materials Management Department 550 S. Main Street, P.O. Box 14184, Orange, California, 92863

Phone: 714-560-5562

Fax: 714-560-5792

Email: staylor@octa.net

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW