Government Contract | Texas
NEW BRAUNFELS SECURITY FENCE & GATE

Bid Information


Bid Alert No: 00000603021

Bid Title: NEW BRAUNFELS SECURITY FENCE & GATE

Agency Bid No. Title: 15470403020

Received Date: 06/17/2016

Close Date: 07/13/2016

Purchase Type: Not Stated

Delivery Point:

Delivery Date: Not Stated

Special Notices: Pre-Bid Conference Optional 06/29/2016 10:30 AM

Specifications

Specifications include, but are not limited to:The work shall include, but not be limited to the following:A. Install new 6 chain link fence with top rail, three strands of barbed wire, andtension wire as shown on plans, install 1 each 6 X 25 cantilever gate with 3strands of barbed wire, Install all electrical wire, conduit, and ground box asper plans. Install motor operator and concrete pad or factory post mount, 1programmable key pad, one standard key pad pedestal as per plans. Installall wiring and programmable key pad entry system, exit loops, safety loops,electric eye. Electrical power will be supplied from emergency panel inbuilding with 220 volt for motor and neutral for 110 volt at operator. Installmotor operator, electric eye, and all ground exit loops and patch all asphalt orconcrete.B. Install one six foot Zinc-5% Aluminum-Mischmetal alloy-coated (GALVINAL)9 gauge chain link fencing and accessories for commercial and industrialuse.C. Post caps: Formed steel, cast malleable iron, or aluminum alloy weathertight closure cap for tubular posts. Provide one cap for each post. Cap tohave provision for barbed wire when necessary. Provide top rail on allfencing with tops to permit passage of top rail.D. Top rail and brace rail ends: Pressed steel per ASTM F626, for connectionof rail and brace to terminal posts.E. Wire ties: 9 gauges [0.148 (3.76 mm)] galvanized steel wire for attachmentof fabric to line posts. Double wrap 13 gauges [0.092 (2.324 mm)] for railsand braces. Hog ring ties of 12-1/2 gauge [0.0985 (2.502 mm)] forattachment of fabric to tension wire.F. Barbed wire: Galvanized-coated steel wire double-strand, 13-3/4 gauge,[0.083 (2.10 mm)] twisted line wire with galvanized steel, 4 point barbsspaced approximately 3 (76.2 mm) on center.G. Barbed wire supporting arms: Pressed steel arms with provisions forattaching 3 rows of barbed wire. Arms shall withstand 250 lb. (113.5 kg)downward pull at outermost end of arm without failure. Provide [45] [3strands, single arm] [and] [6 strands double V arms]. Provide intermediatearms with hole for passage of top rail.H. Nuts and bolts are galvanized.

Product Codes: 98815, 28536

Agency Information


Issuing Agency: State of Texas - Department of Transportation

State: Texas

Agency Type: State and Local

Contact: Sam Copeland 200 E. Riverside, Room 1B.1, Austin, Texas, 78704

Phone: 210-615-5875

Email: sam.copeland@txdot.gov

< PREVIOUS PAGE

GET A FREE
MARKET
ANALYSIS

FREE Market Analysis


Get a FREE 90-Day Market Analysis and see the bids you’ve been missing

GET BIDS NOW